Bedienungsanleitung DeWalt D 27901 (Seite 15 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

69769

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

– 3

sucked up from a container it is recom-

mended to deactivate the "Filter

Dedusting" function.

– If the maximum liquid level is reached

the appliance will turn off automatically.

– In case of non-conductive liquids

(such as emulsion drilling fluids,

oils, and greases) the appliance is

not turned off when the container is

full. The filling level must be continu-

ously monitored and the container

must be emptied in time.

– After the wet vacuuming: Clean the flat

folded filter with the filter cleaning.

Clean the electrodes with a brush.

Clean the container with a damp rag

and dry it.

Illustration

The suction hose is equipped with a clip

system. All C-35/C-DN-35 accessories can

be connected.

 Plug in the main plug.

 Switch on the appliance at the main

switch.

ƽ Danger

Risk of injury and damage! The socket out-

let is only for the connection of power tools

to the vacuum cleaner. Any other use of the

socket outlet is not permitted.

 Connect the mains plug of the electric

power tool to the vacuum cleaner.

 Switch on the appliance at the main switch.

Indicator lamp is on; vacuum cleaner is in

the standby mode.

Note: The vacuum cleaner is turned on and

off automatically with the electric power tool.

Note: The vacuum cleaner starts automat-

ically within 0.5 seconds and continues to

run for 15 seconds after the power tool has

being switched off.

Note: Please refer to "Technical specifica-

tions" for the power connection specifica-

tions of the power tools.

Illustration

 Adjust the stepped power tool adaptor

to fit the connection of the electric pow-

er tool.

Illustration

 Remove the elbow from the suction hose.

 Attach the stepped power tool adaptor

to the suction hose.

Illustration

 Connect the adaptor to the electric pow-

er tool.

Note: A filter dedusting every 5 to 10 min-

utes will increase the life of the flat folded

filter.

– Switch off filter dedusting:

 Push the slide upward.

– Switch on filter dedusting:

 Push the slide downward.

Illustration

 Press and hold the switch on the handle

for several seconds while the filter

cleaning is turned on. The flat folded fil-

ter is automatically cleaned through an

air jet (pulsating sound).

 Filter dedusting: Repeatedly press the

button on the handle while the filter

cleaning is turned on.

 Switch off the appliance at the main

switch.

 Pull out the mains plug.

 Empty the container.

 Vacuum and wipe the appliance inside

and outside with a damp cloth.

 Wind the mains cable around the cable

holder.

 Place the appliance in a dry room and

secure it from unauthorized use.

Clip connection

Operation

Turning on the Appliance

Working with electrical power tools

Filter dedusting

Turn off the appliance

After each operation

Storing the Appliance

15EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D 27901 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info