Bedienungsanleitung DeWalt d 28154k (Seite 20 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

390255

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ENGLISH

(sound pressure) dB(A)* 89.9

(acoustic power) dB(A) 97.9

* at the operator’s ear

Take appropriate measures for the

protection of hearing.

Weighted root mean square acceleration value

according to EN 50144:

< 2.5 m/s

Director Engineering and Product Development

Horst Großmann

DEWALT, Richard-Klinger-Straße 40,

D-65510, Idstein, Germany

Safety instructions

When using power tools, always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and

personal injury.

Read all of this manual carefully before operating

the tool.

Save this manual for future reference.

General

1 Keep work area clean

Cluttered areas and benches can cause accidents.

2 Consider work area environment

Do not expose the tool to rain. Do not use the

tool in damp or wet conditions. Keep the work

area well lit (250 - 300 Lux). Do not use the tool

where there is a risk of causing fire or explosion,

e.g. in the presence of flammable liquids and

gases.

3 Keep children away

Do not allow children, visitors or animals to come

near the work area or to touch the tool or the

mains cable.

4 Dress properly

Do not wear loose clothing or jewellery, as these

can be caught in moving parts. Wear protective

hair covering to keep long hair out of the way.

When working outdoors, preferably wear suitable

gloves and non-slip footwear.

5 Personal protection

Always use safety glasses. Use a face or dust

mask whenever the operations may produce

dust or flying particles. If these particles might be

considerably hot, also wear a heat-resistant

apron. Wear ear protection at all times.

6 Guard against electric shock

Prevent body contact with earthed surfaces

(e.g. pipes, radiators, cookers and refrigerators).

When using the tool under extreme conditions

(e.g. high humidity, when metal swarf is being

produced, etc.), electric safety can be improved

by inserting an isolating transformer or a (FI)

earth-leakage circuit-breaker.

7 Do not overreach

Keep proper footing and balance at all times.

8 Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

9 Secure workpiece

Use clamps or a vice to hold the workpiece. It is

safer and it frees both hands to operate the tool.

10 Connect dust extraction equipment

If devices are provided for the connection of dust

extraction and collection facilities, ensure that

these are connected and properly used.

11 Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches

are removed from the tool before operating the

tool.

12 Extension cables

Before use, inspect the extension cable and

replace if damaged. When using the tool

outdoors, only use extension cables intended for

outdoor use and marked accordingly.

13 Use appropriate tool

The intended use is described in this instruction

manual. Do not force small tools or attachments

to do the job of a heavy-duty tool. The tool will

do the job better and safer at the rate for which it

was intended. Do not force the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt d 28154k Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info