Bedienungsanleitung DeWalt D215821K (Seite 23 von 80) (Englisch)

544687

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

E N G L I S H

● Mount the appropriate accessory.

● Check the friction on the carriage.

● Mark the spot where the hole is to be drilled.

Unlocking the carriage (ﬁg. K)

● To unlock the carriage (1) pull out the lock knob

(2).

● To lock the carriage move the carriage until the

locking shaft passes the hole (43) in the column

and jumps into place.

Always lock the carriage when the

assembly is not in use.

General tips for drilling with diamond core bits

Follow the core bit or manufacturer's

recommendations for using the

accessory.

Note: The use of a centredrill is not necessary.

● Take hold of the feed handle.

● Unlock the carriage.

● Switch on the drill motor in continuous mode.

● Slowly feed the accessory into the workpiece

using the feed handle.

● At the start of the cut, apply light pressure to

allow the accessory to perform the initial groove.

● Continue applying sufﬁcient pressure to achieve

a smooth progressive cut. Do not force.

● Take extra care when the accessory is about to

break through the surface to prevent splintering.

● Always switch off the tool when work is ﬁnished

and before unplugging.

● After use move the carriage upwards until the

carriage locks into place.

Transporting

Always transport the stand with the

carriage locked.

Maintenance

Your attachment has been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper tool care and regular

cleaning.

Adjusting the carriage (ﬁg. L)

After repeated use, the carriage may become

loose. To adjust the play, proceed as follows:

● Tighten the bolts (44) as necessary.

● Check the up and down movement of the

carriage.

Clearing the feed travel (ﬁg. L)

The feed travel should be cleared periodically to

ensure smooth operation.

● Raise the carriage to the highest position

possible.

● Clear the gear rack (45) using a soft brush or

dry cloth.

Lubrication

Your attachment requires no additional lubrication.

Protecting the environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁnd one day that your D

EWALT product

needs replacement, or if it is of no further use to

you, do not dispose of it with household waste.

Make this product available for separate collection.

Separate collection of used products

and packaging allows materials to be

recycled and used again. Re-use of

recycled materials helps prevent

environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate

collection of electrical products from the

household, at municipal waste sites or by the

retailer when you purchase a new product.

DEWALT provides a facility for the collection and

recycling of DEWALT products once they have

reached the end of their working life. To take

advantage of this service please return your

product to any authorised repair agent who will

collect them on our behalf.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D215821K Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info