Bedienungsanleitung DeWalt D21583K T-2 (Seite 34 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

591334

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

ENGLISH

Markings on Tool

The following pictograms are shown on the tool:

Safe use warning

Read instruction manual

before use

Wear ear protection

Wear eye protection

Always wear a dust mask

Always wear safety shoes

Always wear safety gloves.

Dust extraction

No water supply

Water supply

Gear selection

Applications in masonry

Applications in concrete

When using the machine in applications

exceeding the max. allowable diameter

for handheld use, make sure that the

machine is mounted on a stand. Never

use the machine handheld in these

applications, as it will lead to loss of

control and serious injury.

DATE CODE POSITION (FIG. 1)

The Date Code (x), which also includes the year of

manufacture, is printed into the housing.

Example:

2015 XX XX

Year of Manufacture

Additional Instructions for Use in

Stationary Position

SAFETY PRECAUTIONS

• Hazardous situation due to broken parts.

Always check the core bits before using.

Never use deformed or damaged drill core

bits.

• Use of non-recommended cutting tools,

which can lead to injuries due to the loss

of control. Use only core bits which are

designed for this tool and consider the

minimum and maximum diameter and length

of those core bits.

• Incorrect clamping and positioning of the

core bit may lead to dangerous situation by

broken and ejected parts of the drill core bit.

Ensure that the drill core bit is assembled and

adjusted correctly. Tighten the core bit with

sufficient fastening torque.

• Always wear suitable protective equipment

(PPE) such as:

• Hearing protection, to reduce the risk of

induced hearing loss

• Gloves, when handling core bits or rough

material, to reduce injuries by sharp edges

• Safety glasses, to prevent injuries by flying

particles

• Non-slipping footwear, to prevent injuries

caused by slippery surfaces

• Hazardous situation due to dust production

when drilling without water supply. Use a

dust extraction device, if any, or at least a

dust mask.

WARNING: We recommend the use of

a residual current device with a residual

current rating of 30mA or less.

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing

– Risk of personal injury due flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

The following factors increase the risk of breathing

problems:

– No dust extractor connected when performing

dry operation

– Insufficient dust extraction caused by uncleand

exhaust filters

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D21583K T-2 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info