Bedienungsanleitung DeWalt D21710 T 5 (Seite 11 von 16) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544700

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Cleaning

WARNING: Blow dirt and dust out of the

main housing with dry air as often as dirt

is seen collecting in and around the air

vents. Wear approved eye protection and

approved dust mask when performing

this procedure.

WARNING: Never use solvents or other

harsh chemicals for cleaning the non-

metallic parts of the tool. These chemicals

may weaken the materials used in these

parts. Use a cloth dampened only with

water and mild soap. Never let any liquid

get inside the tool; never immerse any

part of the tool into a liquid.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have not

been tested with this product, use of

such accessories with this tool could be

hazardous. To reduce the risk of injury,

only DEWALT, recommended accessories

should be used with this product.

Consult your dealer for further information on the

appropriate accessories.

Protecting the environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁnd one day that your D

EWALT product

needs replacement, or if it is of no further use to you,

do not dispose of it with household waste. Make this

product available for separate collection.

Separate collection of used products and

packaging allows materials to be recycled

and used again. Re-use of recycled

materials helps prevent environmental

pollution and reduces

the demand for raw materials.

Local regulations may provide for separate collection

of electrical products from the household, at municipal

waste sites or by the retailer when you purchase a

new product.

ENGLISH

Switching on and off (ﬁ g. A)

• To run the tool, press the variable speed switch (1).

The pressure exerted on the variable speed switch

determines the tool speed.

• If necessary, press the lock-on button (2) for

continuous operation and release the switch.

The lock-on button works only in full speed,

forward rotation.

• To stop the tool, release the switch.

• To stop the tool in continuous operation, press

the switch brieﬂ y and release it. Always switch

off the tool when work is ﬁ nished and before

unplugging.

Screwdriving

• Select forward or reverse rotation.

Percussion drilling (ﬁ g. A)

• Select the percussion mode.

• Press the switch (1).

Rotary drilling (ﬁ g. A)

• Select the rotary drilling mode.

• Proceed as described for percussion drilling.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-ups

or when making repairs. Be sure the

trigger switch is in the OFF position. An

accidental start-up can cause injury.

Lubrication

Your power tool requires no additional lubrication.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D21710 T 5 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info