Bedienungsanleitung DeWalt D21805 T 2 (Seite 28 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

544713

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

ENGLISH

1 Chuck key

1 Kitbox (K-models only)

1 Instruction manual

1 Exploded drawing

● Check for damage to the tool, parts or

accessories which may have occurred during

transport.

● Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. A, F)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

1 Variable speed switch

2 Lock-on button

3 Forward/reverse slider

4 Two gear selector

5 Mode selector

6 Side handle

7 Depth adjustment rod

8 Keyed chuck

9 Sleeve

10 Chuck key

11 Main handle

12 Screw

INTENDED USE

Your D21805/D21810/D21815 percussion drill has

been designed for professional drilling and impact

drilling as well as for screwdriving applications.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

These heavy-duty drills are professional power tools.

DO NOT let children come into contact with the tool.

Supervision is required when inexperienced operators

use this tool.

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 60745; therefore no

earth wire is required.

WARNING: 115 V units have to

be operated via a fail-safe isolating

transformer with an earth screen between

the primary and secondary winding.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

EWALT service organisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in the

plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made

to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved

extension cable suitable for the power input of this

tool (see technical data). The minimum conductor size

is 1 mm

; the maximum length is 30 m.

When using a cable reel, always unwind the cable

completely.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-ups

or when making repairs. Be sure the

trigger switch is in the OFF position. An

accidental start-up can cause injury.

Selecting the Operating Mode (ﬁ g. D)

The tool can be used in two operating modes:

Rotary drilling: for steel, wood and

plastics.

Percussion drilling: simultaneous

rotating and impacting for concrete and

masonry drilling operations.

● Select the required operating mode by rotating

the mode selector (5) to the required position.

Inserting and Removing a Bit (ﬁ g. A)

● Open the chuck by turning the sleeve (9)

counterclockwise and insert the bit shank.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D21805 T 2 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info