Bedienungsanleitung DeWalt D25102 (Seite 29 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

446415

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

ENGLISH

• Always switch off the tool when work is finished

and before unplugging.

Rotary drilling (fig. A)

• Set the mode selector switch (4) to the “rotary

drilling” position.

• Depending on your tool, follow either of the

following instructions:

- Fit the chuck adapter/chuck assembly

(D25102(K)/D25102C/D25103K/D25203K).

- Replace the tool holder with the chuck

(D25104K).

• Proceed as described for hammer drilling.

Never use standard chucks in the

hammer drilling mode.

Screwdriving (fig. A)

• Set the mode selector switch (4) to the “rotary

drilling” position.

• Select the direction of rotation.

• Depending on your tool, follow either of the

following instructions:

- Insert the special SDS-plus

screwdriving

adaptor for use with hexagonal screwdriver bits

(D25102(K)/D25102C/D25103K/D25203K).

- Replace the tool holder with the chuck

(D25104K).

• Insert the appropriate screwdriver bit.

When driving slotted head screws always use

bits with a finder sleeve.

• Gently press the variable speed switch (1) to

prevent damage to the screw head. In reverse

(LH) rotation the tool speed is automatically

reduced for easy screw removal.

• When the screw is flush with the workpiece,

release the variable speed switch to prevent the

screw head from penetrating into the workpiece.

D25103K/D25104K/D25203K - Chipping and

chiselling (fig. A)

• Set the mode selector switch (4) to the

“hammering only” position.

• Insert the appropriate chisel and rotate it by hand

to lock it into one of 51 positions.

• Adjust the side handle (9) as required.

• Switch on the tool and start working.

• Always switch off the tool when work is finished

and before unplugging.

• Do not use this tool to mix or pump

easily combustible or explosive fluids

(benzine, alcohol, etc.).

• Do not mix or stir inflammable liquids

labelled accordingly.

Various types of SDS-plus

drill bits and chisels are

available as an option.

Consult your dealer for further information on the

appropriate accessories.

Maintenance

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

• This machine is not user-serviceable. Take the

tool to an authorised DEWALT repair agent after

approximately 40 hours of use. If problems occur

before this time contact an authorised DEWALT

repair agent.

• The tool will automatically switch off when the

carbon brushes are worn.

Lubrication

Your power tool requires no additional lubrication.

Accessories and attachments used must be

regularly lubricated around the SDS-plus

fitment.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Unwanted tools and the environment

Take your tool to an authorized DEWALT repair

agent where it will be disposed of in an

environmentally safe way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25102 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info