Bedienungsanleitung DeWalt D25112C (Seite 35 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

446423

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

E N G L I S H

- Insert the special SDS-plus® screwdriving

adaptor for use with hexagonal screwdriver

bits (D25112(C)K/D25113K/D25213K).

- Replace the tool holder with the chuck

(D25114K).

● Insert the appropriate screwdriver bit.

When driving slotted head screws always use

bits with a ﬁnder sleeve.

● Gently press the variable speed switch (1) to

prevent damage to the screw head. In reverse

(LH) rotation the tool speed is automatically

reduced for easy screw removal.

● When the screw is ﬂush with the workpiece,

release the variable speed switch to prevent the

screw head from penetrating into the workpiece.

D25113K/D25114K/D25213K -

Chipping and chiselling (ﬁg. A)

● Set the mode selector switch (4) to the

"hammering only" position.

● Insert the appropriate chisel and rotate it by

hand to lock it into one of 51 positions.

● Adjust the side handle (9) as required.

● Switch on the tool and start working.

● Always switch off the tool when work is ﬁnished

and before unplugging.

● Do not use this tool to mix or pump

easily combustible or explosive ﬂuids

(benzine, alcohol, etc.).

● Do not mix or stir inﬂammable liquids

labelled accordingly.

Optional accessories

Various types of SDS-plus

drill bits and chisels

are available as an option.

Consult your dealer for further information on the

appropriate accessories.

Maintenance

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular

cleaning.

● This machine is not user-serviceable. Take the

tool to an authorised DEWALT repair agent after

approximately 40 hours of use.

If problems occur before this time contact an

authorised DEWALT repair agent.

● The tool will automatically switch off when the

carbon brushes are worn.

Lubrication

Your power tool requires no additional lubrication.

Accessories and attachments used must be

regularly lubricated around the SDS-plus

ﬁtment.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Never use solvents or other harsh

chemicals for cleaning the non-metallic

parts of the tool. These chemicals may

weaken the plastic materials used in

these parts. Use a cloth dampened only

with water and mild soap.

Protecting the environment

Separate collection. This product

must not be disposed of with normal

household waste.

Should you ﬁnd one day that your D

EWALT product

needs replacement, or if it is of no further use to

you, do not dispose of it with household waste.

Make this product available for separate collection.

Separate collection of used products

and packaging allows materials to

be recycled and used again. Re-use

of recycled materials helps prevent

environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate

collection of electrical products from the

household, at municipal waste sites or by the

retailer when you purchase a new product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25112C Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info