Bedienungsanleitung DeWalt D25133 (Seite 26 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

712252

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

Residual Risks

In spite of the application of the relevant safety regulations

and the implementation of safety devices, certain residual risks

cannot be avoided. These are:

• Impairment ofhearing.

• Risk of personal injury due to flyingparticles.

• Risk of burns due to accessories becoming hot

duringoperation.

• Risk of personal injury due to prolongeduse.

Electrical Safety

The electric motor has been designed for one voltage only.

Always check that the power supply corresponds to the voltage

on the rating plate.

Your

DeWALT

tool is double insulated in accordance

with EN60745; therefore no earth wire is required.



WARNING: 115 V units have to be operated via a fail-safe

isolating transformer with an earth screen between the

primary and secondary winding.

If the supply cord is damaged, it must be replaced by a

specially prepared cord available through the

DeWALT

serviceorganisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the oldplug.

• Connect the brown lead to the live terminal in theplug.

• Connect the blue lead to the neutralterminal.



WARNING: No connection is to be made to the

earthterminal.

Follow the fitting instructions supplied with good quality plugs.

Recommended fuse: 13A.

Using an Extension Cable

An extension cord should not be used unless absolutely

necessary. Use an approved extension cable suitable for

the power input of your charger (see Technical Data). The

minimum conductor size is 1.5 mm

; the maximum length

is30m.

When using a cable reel, always unwind the cablecompletely.

Package Contents

The package contains:

1 Heavy-duty rotary hammerdrill

1 Side handle

1 Depth adjustment rod

1 Keyless chuck (D25134, D25144)

1 Instruction manual

• Check for damage to the tool, parts or accessories which may

have occurred duringtransport.

• Take the time to thoroughly read and understand this manual

prior tooperation.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

Date Code Position (Fig. A)

The date code

12

, which also includes the year of manufacture,

is printed into thehousing.

Example:

2017 XX XX

Year of Manufacture

Description (Fig. A, E, H)



WARNING: Never modify the power tool or any part of it.

Damage or personal injury couldresult.

Variable speed switch

Main handle

Forward/Reverse lever

Mode selector

Mode selector button

SDS Plus tool holder

Depth adjustment rod

Side handle

Depth rod button

Sleeve

Dust cover

Date code

Locking collar (D25134, D25144)

Keyless chuck (D25134, D25144)

Side handle work light (D25144, D25263)

Battery door screw (D25144, D25263)

On/off light button (D25144, D25263)

Intended Use

The D25032 heavy-duty rotary hammer has been designed for

professional drilling, hammerdrilling, and screwdriving. The

D25033, D25133, D25134, D25143, D25144 and D25263 heavy-

duty rotary hammers have been designed for professional

drilling, hammerdrilling, screwdriving and lightchipping.

DO NOT use under wet conditions or in the presence of

flammable liquids orgases.

These hammerdrills are professional power tools.

DO NOT let children come into contact with the tool.

Supervision is required when inexperienced operators use

thistool.

• Young children and the infirm. This appliance is not

intended for use by young children or infirm persons

without supervision.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25133 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info