Bedienungsanleitung DeWalt D25404K T-3 (Seite 27 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

544495

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

ENGLISH

to provide extra cushion and limit exposure by

taking frequent rest periods.

• Do not recondition bits yourself. Chisel

reconditioning should be done by an authorized

specialist. Improperly reconditioned chisels

could cause injury.

• Wear gloves when operating tool or

changing bits. Accessible metal parts on the

tool and bits may get extremely hot during

operation. Small bits of broken material may

damage bare hands.

• Never lay the tool down until the bit has

come to a complete stop. Moving bits could

cause injury.

• Do not strike jammed bits with a hammer to

dislodge them. Fragments of metal or material

chips could dislodge and cause injury.

• Slightly worn chisels can be resharpened by

grinding.

• Keep the power cord away from the rotating

bit. Do not wrap the cord around any part of

your body. An electric cord wrapped around a

spinning bit may cause personal injury and loss

of control.

Residual Risks

The following risks are inherent to the use of rotary

hammers:

– Injuries caused by touching the rotating parts or

hot parts of the tool .

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be

avoided. These are:

– Impairment of hearing .

– Risk of squeezing fingers when changing the

accessory.

– Health hazards caused by breathing dust

developed when working in concrete and/or

masonry.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual

before use.

Wear ear protection.

Wear eye protection.

DATE CODE POSITION (FIG. 1)

The Date Code (m), which also includes the year of

manufacture, is printed into the housing surface that

forms the mounting joint between tool and battery.

Example:

2009 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Heavy-duty rotary hammerdrill

1 Side handle

1 Depth adjustment rod

1 Kitbox

1 Keyless chuck (D25405K)

1 Safety glasses (D25405K)

1 Work gloves (D25405K)

1 Tough case (D25405K)

4 HSS drill bits (D25405K)

4 Bradpoint drill bits (D25405K)

2 Flatwood drill bits (D25405K)

2 SDS Plus

drill bits (D25405K)

1 SDS Plus

chisel (D25405K)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

DESCRIPTION (FIG. 1)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. Variable speed switch

b. Mode selector

c. Safety lock

d Tool holder

e Dust cover

f. Locking collar

g. Depth adjustment rod

h. Side handle

i. Depth stop clamp

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25404K T-3 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info