Bedienungsanleitung DeWalt D25601K (Seite 33 von 160) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544648

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

ENGLISH

5) SERVICE

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Additional Safety Instructions for

Rotary Hammers

• Wear ear protectors. Exposure to noise can

cause hearing loss.

• Use auxiliary handle (c), if supplied with the

tool. Loss of control can cause personal injury.

• Hold power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and

could give the operator an electric shock.

Residual Risks

The following risks are inherent to the use of rotary

and chipping hammers:

– Injuries caused by touching the rotating parts or

hot parts of the tool

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of squeezing fingers when changing the

accessory.

– Health hazards caused by breathing dust

developed when working in concrete and/or

masonry.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual

before use.

Wear ear protection.

Wear eye protection.

Clutch Setting 40Nm is designed for

most drilling applications.

Clutch Setting 80Nm is designed for

higher torque applications.

Red service indicator LED. For detailed

description see under Service Indicator

LED's.

Yellow service indicator LED. For detailed

description see under Service Indicator

LED's.

DATE CODE POSITION (FIG. 1)

The date code (w), which also includes the year of

manufacture, is printed into the housing.

Example:

2013 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Rotary hammer

(D25501, D25601, D25602, D25603)

1 Chipping hammer (D25820, D25831)

1 Side handle

1 Kitbox (K-models only)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1A, 1B, 2A, 2B)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

a. Trigger switch (D25501, D25601, D25602,

D25603)

On/off rocker switch (D25820, D25831)

b. Lock-on slider (D25601, D25602, D25603)

c. Side handle

d. Main handle

e. Active vibration control (D25601, D25602,

D25603, D25831)

f. Mode selector switch

g. Electronic speed and impact control dial

(D25601, D25602, D25603, D25831)

h. Clamp wheel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25601K Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info