Bedienungsanleitung DeWalt D25830K T 3 (Seite 29 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

544667

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

ENGLISH

tool is extremely versatile and adaptable for many

different applications. The required setting is a matter

of experience, e.g.,

– When chiselling soft, brittle materials or when

minimum break-out is required, set the dial

to 1 or 2 (low);

– When breaking harder materials, set the dial

to 7 (full power).

Assembling and Fitting the Side

Handle (ﬁ g. 7)

The side handle (h) can be mounted on either side of

the machine to suit both RH- and LH-users.

WARNING: Always operate the

tool with the side handle properly

assembled.

1. Snap the steel ring (m) over the collar (g) behind

the tool holder (f). Squeeze both ends together,

mount the bush (k) and insert the pin (l).

2. Place the side handle (h) and screw on the

clamp knob (i). Do not tighten.

3. Rotate the side handle mounting assembly to

the desired position.

4. Lock the side handle mounting assembly in

place by tightening the clamp knob (i).

OPERATION

Instructions for Use

WARNING:

• Always observe the safety instructions

and applicable regulations.

• For your own safety, always use the

tool with both hands.

• Be aware of the location of pipework

and wiring.

• Apply a pressure of approx. 20 kg

to the tool. Excessive force does not

speed up chiselling but decreases tool

performance and may shorten tool life.

Proper Hand Position (ﬁ g. 1, 8)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the

side handle (h), with the other hand on the main

handle (j).

Switching On and Off (ﬁ g. 9)

To turn the tool on, press the on/off switch (a).

For continuous operation, press the lock-on button

(n) on the on/off switch.

To stop the tool, release the switch.

Chipping and Chiselling (ﬁ g. 1, 6)

1. Insert the appropriate chisel and rotate it by

hand to lock it into one of 8 positions.

2. Set the electronic speed and impact control dial

(b).

3. Fit and adjust the side handle (h).

4. Switch on the tool and start working.

5. Always turn the tool off when work is finished

and before unplugging.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-ups

or when making repairs. Be sure the

trigger switch is in the OFF position. An

accidental start-up can cause injury.

Tool maintenance has to be carried out as soon as

the indicator LED lights up.

This machine is not user-serviceable. Take the

tool to an authorised D

EWALT repair agent after

approximately 80 hours of use. If problems occur

before this time contact an authorised D

EWALT

repair agent.

Accessory Maintenance

Accessory maintenance at the right time guarantees

optimal results in application and a long and efficient

accessory life.

Grind the chisels on grinding discs. Refer to figure 10

for the appropriate angles of the following chisels:

o. Spade-shaped chisel

p. Cold chisel

q. Pointed chisel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25830K T 3 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info