Bedienungsanleitung DeWalt D25961K (Seite 28 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544655

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

ENGLISH

• Hold power tools by insulated gripping

surfaces when performing an operation

where the cutting tool may contact hidden

wiring or its own cord. Cutting accessory

Contacting a “live” wire may make exposed

metal parts of the tool “live” and shock the

operator.

• Be certain that the material being drilled does

not conceal electric or gas service and that

their locations have been verified with the utility

companies.

• Keep a firm grip on the tool at all times. Do not

attempt to operate this tool without holding it

with both hands. Operating this tool with one

hand will result in loss of control. Breaking

through or encountering hard materials such as

re-bar may be hazardous as well. Tighten the

side handle securely before use.

• Ensure the chisel is secured in place before

operating the tool.

• In cold-weather conditions or when the tool

has not been used for a longer period of time,

let the tool run with no load for several minutes

before use.

• When working above ground level ensure the

area below is clear.

• Do not touch the chisel or the parts close to the

chisel immediately after operation, as they may

be extremely hot and cause burns to the skin.

• Always direct the power cable to the rear, away

from the chisel.

• Do not operate this tool for long periods of

time. Vibration caused by hammer action may

be harmful to your hands and arms. Use gloves

to provide extra cushion and limit exposure by

taking frequent rest periods.

Residual Risks

The following risks are inherent to the use of

demolition hammers:

– Injuries caused by touching the hot parts of the

tool.

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of squeezing fingers when changing the

accessory.

– Health hazards caused by breathing dust

developed when working in concrete and/or

masonry.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual

before use.

Wear ear protection.

Wear eye protection.

DATE CODE POSITION (FIG. 1)

The Date Code (g), which also includes the year of

manufacture, is printed into the housing.

Example:

2011 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Demolition hammer

1 Side handle

1 Pointed chisel

1 Plastic case

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. 1)

a. On/off switch

b. Main handle

c. Side handle clamping knob

d. Tool retainer

e. Tool holder

f. Side handle

INTENDED USE

The D25960, D25961 heavy-duty demolition

hammers are designed for heavy-duty demolition

and breaking applications.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

These heavy-duty demolition hammers are

professional power tools.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D25961K Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info