Bedienungsanleitung DeWalt D26414 (Seite 33 von 148) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546437

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

ENGLISH

Switching On and Off (ﬁ g. 4)

1. Push the on/off switch (a) to the desired air flow

settings:

I: 240 liter/min (50ºC–400ºC)

250 liter/min (50˚–400˚C)] (D26414)

A low air flow to heat up the workpiece

slowly.

II: 450 liter/min (50˚–600˚C)

500 liter/min (50˚–600˚C) (D26414)

A high air flow to heat up the workpiece

quickly.

2. To turn the tool off, push the on/off switch (a)

to position O. Disconnect the tool from the

power source and let the tool cool down before

moving or storing it.

Removing Paint

WARNING: Refer to Important Notice

under Additional Safety Instructions

for Heat Guns before using the tool to

remove paint.

WARNING: Do not strip metal window

frames as the heat may crack the glass.

• When striping other window frames, use a

glass protection nozzle.

• To prevent igniting the surface, do not keep

the tool directed at one spot too long.

• Avoid collecting paint on the scraper

accessory, as it may ignite. If necessary,

carefully remove paint debris from the

scraper accessory using a knife.

1. Attach the appropriate accessory.

2. Turn the air temperature adjustment knob (d) to

high.

3. Turn the tool on by selecting the desired air flow.

4. Direct the hot air onto the paint to be removed.

Best results will be achieved if the heat gun is

moved slowly, but CONSTANTLY, from side to

side to evenly distribute heat. DO NOT LINGER

OR PAUSE IN ONE SPOT.

5. When the paint softens, scrape the paint away

using a hand scraper.

REMEMBER: Splinters and small particles of

stripped paint can be ignited and blown through

holes and cracks in the surface being stripped.

Stationary Use (ﬁ g. 1)

This tool can also be used in stationary mode.

1. Fold down the kickstand (c) as shown in

Figure 1.

2. Set the tool onto a level, stable workbench.

Ensure the tool will not tip over.

3. Secure the power cord to prevent entanglement

or pulling the tool off the workbench.

4. Turn the tool on by selecting the desired air flow.

Constant Heat Control

(Overload Protection)

When the tool is overloaded, this feature protects

the heating element from damage without stopping

the tool and/or without a cool down period.

1. When the temperature gets too hot, the heating

element switches itself off. The motor will

continue to run and produce cold air.

2. When the temperature has cooled sufficiently

(taking only a few seconds) the heating element

will switch on automatically.

Tool Ring (ﬁ g. 1)

WARNING: ALWAYS turn heat gun off,

disconnect from the power source and

let the tool cool down for at least 30

minutes before moving or storing it.

For easy storage, the tool can hang from the tool

ring (f). The heat gun should be stored indoors.

Cool Down Period

The nozzle and accessory becomes very hot during

use. Turn heat gun off, disconnect from the power

source and let the tool cool down for at least 30

minutes before moving or storing it.

NOTE: To reduce the cooling time, switch the tool

on at the lowest air temperature setting and let it run

for a few minutes before turning the heat gun off.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing

set-ups or when making repairs.

Be sure the trigger switch is in the OFF

position. An accidental start-up can

cause injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D26414 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info