Bedienungsanleitung DeWalt D28116 T 2 (Seite 28 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546937

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

ENGLISH

• Extensive use of flap discs in metal applications

can result in the increased potential for electric

shock. To reduce this risk, insert an RCD before

use and clean the ventilation slots daily by blowing

dry compressed air into the ventilation slots in

accordance with the below maintenance

instructions.

Labels on tool

The following pictographs are shown on the tool:

Read the instruction manual before use

Wear safety glasses

Wear ear protection

Package contents

The package contains:

1 Angle grinder

1 Guard

1 Side handle

1 Flange set

1 Two-pin spanner

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your angle grinder D28116/D28117/D28133/

D28136/D28137 has been designed for professional

grinding and cutting applications.

1 On/off switch

2 Spindle lock

3 Guard

4 Side handle

5 Electronic variable speed control

6 Dust ejection outlet

Anti-vibration side handle

The anti-vibration side handle offers added comfort

by absorbing the vibrations caused by the tool.

Keyless guard

The keyless guard allows for quick adjustment during

the application to enhance application versatility.

Dust ejection system

The dust ejection system prevents dust pile-up

around the guard and motor inlet, and minimises the

amount of dust entering the motor housing.

D28116, D28117, D28133, D28136 & D28137 -

Soft start feature

The soft start feature allows a slow speed build-up

to avoid an initial jerk when starting. This feature is

particularly useful when working in confined spaces.

D28116/D28117/D28136/D28137 -

Electronic variable speed control

The electronic variable speed control offers added

tool control and enables the tool to be used at

optimum conditions to suit the accessory and material.

D28117/D28137 - Autobalance feature

The auto balance feature continuously adjusts the

balance to reduce the vibration of the machine when

it is running. This improves user comfort during the

operation and is particularly useful when using the

machine for long periods of time.

Clutch

The torque limiting clutch reduces the maximum

torque reaction transmitted to the operator in case

of jamming of a cutting disc. This feature also

prevents the gearing and electric motor from stalling.

The torque limiting clutch has been factory-set and

cannot be adjusted.

No-volt release switch

The on/off switch has a no-volt release function:

should the power be shut off for some reason,

the switch has to be deliberately reactivated.

Overload protection

The power supply to the motor will be reduced in

case of motor overload. The power will return to

normal once the tool has cooled down to suitable

operating temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D28116 T 2 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt D28116 T 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info