Bedienungsanleitung DeWalt D28132C T 1 (Seite 27 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546958

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

ENGLISH

For more information, please contact DEWALT at the address below, or refer to the back of the manual.

D28111 D28113 D28130 D28132C D28134 D28135 D28139 D28141

(sound pressure) dB(A) 90 89 90 89 89 91 89 91

(sound pressure uncertainty) dB(A) 5 3 3 3 3 3 3 3

(acoustic power) dB(A) 101 100 101 100 100 102 100 102

(acoustic power uncertainty) dB(A) 5 3 3 3 3 3 3 3

Vibration total values (triax vector sum) determined according to EN 60745:

Weighted RMS acceleration value

m/s² 5,3 7,0 6,0 4,6 7,0 5,2 5,1 5,7

Uncertainty K m/s² 10,8

11,7 10,0 7,7 9,6 9,4 7,4 9,7

The declared vibration emission value has been

measured in accordance with a standard test method

and may be used for comparing one tool with

another.

The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING: The vibration emission

value during actual use of the power

tool can differ from the declared value

depending on the ways in which the tool

is used. This could lead to a significant

underestimate of exposure when the tool

is used regularly in such a way.

An estimation of the level of exposure to vibration

experienced during a given period of work should also

take into account the times when the tool is switched

off and when it is running idle in addition to the trigger

time.

This may significantly reduce the exposure level over

the total working period.

Director Engineering and Product Development

Horst Großmann

DEWALT, Richard-Klinger-Straße 11

D-65510, Idstein, Germany

07/2007

WARNING: To reduce the risk of injury,

read the instruction manual.

General Safety Rules

WARNING! Read all instructions. Failure

to follow all instructions listed below may

result in electric shock, fire and/or serious

injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE.

The term “power tool” in all of the warnings listed

below refers to your mains-operated (corded) power

tool or battery-operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs

and matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators. There

is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D28132C T 1 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info