Bedienungsanleitung DeWalt D28132C T 1 (Seite 31 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546958

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

INTENDED USE

Your angle grinder D28111/D28113(K)/D28130/

D28132C/D28134/D28135(K)/D28139/D28141 has

been designed for professional grinding and cutting

applications .

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

DO NOT use grinding wheels other than center

depressed wheels and flap-disk.

These heavy-duty angle grinders are professional

power tools. DO NOT let children come into

contact with the tool. Supervision is required when

inexperienced operators use this tool.

1 On/off switch

2 Spindle lock

3 Guard

4 Side handle

D28113(K)/D28130/D28132C/D28135(K)/D28141 -

ANTI-VIBRATION SIDE HANDLE

The anti-vibration side handle offers added comfort

by absorbing the vibrations caused by the tool.

D28113(K)/D28130/D28132C/D28134/D28135(K)/D28141 -

KEYLESS GUARD

The keyless guard allows for quick adjustment during

the application to enhance application versatility.

D28113(K)/D28130/D28132C/D28134/D28135(K)/D28141 -

DUST EJECTION SYSTEM

The dust ejection system prevents dust pile-up

around the guard and motor inlet, and minimises the

amount of dust entering the motor housing.

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 60745; therefore no

earth wire is required.

WARNING: 115 V units have to

be operated via a fail-safe isolating

transformer with an earth screen between

the primary and secondary winding.

Mains plug replacement

(U.K. & Ireland only)

• Should your mains plug need replacing and you

are competent to do this, proceed as instructed

below. If you are in doubt, contact an authorized

EWALT repair agent or a qualiﬁ ed electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug

with bared copper conductors is dangerous if

engaged in a live socket outlet.

• Only ﬁ t 13 Amperes BS1363A approved plugs

ﬁ tted with the correctly rated fuse (1).

• The cable wire colours, or a letter, will be marked

at the connection points of most good quality

plugs. Attach the wires to their respective points

in the plug (see below). Brown is for Live (L) (2)

and Blue is for Neutral (N) (4).

• Before replacing the top cover of the mains plug

ensure that the cable restraint (3) is holding the

outer sheath of the cable ﬁ rmly and that the two

leads are correctly ﬁ xed at the terminal screws.

WARNING: Never use a light socket.

Never connect the live (L) or neutral (N)

wires to the earth pin marked E or .

For 115 V units with a power rating exceeding 1500 W,

we recommend to ﬁ t a plug to BS4343 standard.

Using an extension cable

If an extension cable is required, use an approved

extension cable suitable for the power input of this

tool (see technical data). The minimum conductor

size is 1.5 mm

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D28132C T 1 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info