Bedienungsanleitung DeWalt D28423 T 2 (Seite 22 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

548662

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

Director Engineering and Product Development

Horst Großmann

DEWALT, Richard-Klinger-Straße 40,

D-65510, Idstein, Germany

04/2007

Safety instructions

When using power tools, always observe the

safety regulations applicable in your country

to reduce the risk of ﬁ re, electric shock and

personal injury.

Read all of this manual carefully before operating

the tool.

Save this manual for future reference.

General

1 Keep work area clean

Cluttered areas and benches can cause accidents.

2 Consider work area environment

Do not expose the tool to rain. Do not use the tool

in damp or wet conditions. Keep the work area

well lit (250 - 300 Lux). Do not use the tool where

there is a risk of causing ﬁ re or explosion, e.g. in

the presence of ﬂ ammable liquids and gases.

3 Keep children away

Do not allow children, visitors or animals to come

near the work area or to touch the tool or the

mains cable.

4 Dress properly

Do not wear loose clothing or jewellery, as these

can be caught in moving parts. Wear protective

hair covering to keep long hair out of the way.

When working outdoors, preferably wear suitable

gloves and non-slip footwear.

5 Personal protection

Always use safety glasses. Use a face or dust

mask whenever the operations may produce

dust or ﬂ ying particles. If these particles might

be considerably hot, also wear a heat-resistant

apron. Wear ear protection at all times.

6 Guard against electric shock

Prevent body contact with earthed surfaces

(e.g. pipes, radiators, cookers and refrigerators).

When using the tool under extreme conditions

(e.g. high humidity, when metal swarf is being

produced, etc.), electric safety can be improved

by inserting an isolating transformer or a (FI)

earth-leakage circuit-breaker.

7 Do not overreach

Keep proper footing and balance at all times.

8 Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

9 Secure workpiece

Use clamps or a vice to hold the workpiece. It is

safer and it frees both hands to operate the tool.

10 Connect dust extraction equipment

If devices are provided for the connection of dust

extraction and collection facilities, ensure that

these are connected and properly used.

Level of sound pressure according to 86/188/EEC & 98/37/EC, measured according to EN 50144:

D28410 D28411 D28413 D28414 D28420 D28421 D28422 D28423 D28432C D28750

(sound pressure) dB(A)* 90.5 90.0 90.0 90.0 90.5 90.5 90.0 90.0 90.0 90.5

(acoustic power) dB(A) 99.5 98.5 98.5 98.5 99.5 99.5 99.0 98.5 98.5 99.0

* at the operator’s ear

Take appropriate measures for the protection of hearing.

Weighted root mean square acceleration value according to EN 50144:

D28410 D28411 D28413 D28414 D28420 D28421 D28422 D28423 D28432C D28750

5.8 m/s

5.95 m/s

5.8 m/s

5.9 m/s

5,95 m/s

6.1 m/s

5.9 m/s

5.5 m/s

5.9 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D28423 T 2 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info