Bedienungsanleitung DeWalt D28720 T 1 (Seite 7 von 28) (Englisch, Französisch)

548823

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ENGLISH

• In operation, avoid bouncing the wheel or

giving it rough treatment. If this occurs, stop

the tool and inspect the wheel for cracks or

flaws.

• Clean your chop saw periodically following the

procedure in this manual.

• Never use the machine without the guards in

place.

• Do not remove base.

• ALWAYS USE THE VISE OR SPECIAL

FIXTURE TO CLAMP WORK SECURELY.

Other aids such as spring, bar, or C-clamps

may be appropriate for certain sizes and shapes

of workpiece. Use care in selecting and placing

these clamps and make a dry run before

making a cut.

• Use only 355mm (14") type 1 wheels rated at

4100rpm or higher.

• Allow cut off parts to cool before handling.

• Do not attempt to cut wood or plastic with this

tool.

• NEVER CUT MAGNESIUM WITH THIS

TOOL.

• Use chop saw in a well-ventilated area.

• Turn chop saw off before removing any pieces

from the base.

• DO NOT CUT ELECTRICALLY LIVE

MATERIAL.

• Do not use circular saw blades or any

other toothed blades with this tool. Serious

injury may result.

• DO NOT OPERATE THIS TOOL NEAR

FLAMMABLE LIQUIDS, GASES OR DUST.

Sparks or hot chips from cutting or arcing motor

brushes may ignite combustible materials.

• Ensure that the abrasive wheel is correctly fitted

and tightened before use.

• Let the tool run at no-load in a safe position

for at least 1 minute. If there is a considerable

vibration or if any other defect occurs, stop the

tool and check it to determine the cause.

• Ensure that ventilation slots are kept clear when

working in dusty conditions. First disconnect the

machine from the mains supply then clean the

openings by using a soft brush.

• Do not use the side of the abrasive wheel as a

deburring grinder. This will substantially weaken

the wheel creating an unsafe condition. The

wheel may come apart.

• The wheel continues to rotate after the machine

is switched off.

WARNING: Wear appropriate

hearing protection during use. Under

some conditions and duration of use,

noise from this product may contribute

to hearing loss.

CAUTION: Spark deflector will get hot.

Avoid touching or adjusting while hot.

Keep cordset and materials away from

spark deflector.

• Avoid prolonged contact with dust from

cutting activity Wear protective clothing

and wash exposed areas with soap and

water. Allowing dust to get into your mouth,

eyes, or lay on the skin may promote absorption

of harmful chemicals.

• Do not use toothed blades.

• Do not expose to rain or use in damp locations.

• Only use chop saw wheel of a

max. Thickness of 2.8mm and a

max. Diameter of 355mm (14").

Residual Risks

• The following risks are inherent to the use of

these machines:

– Injuries caused by touching the rotating

parts.

– Injuries caused by disruption of the cutting

disc.

• These risks are most evident:

– Within the range of operation.

– Within the range of the rotating machine

parts.

• In spite of the application of the relevant

safety regulations and the implementation of

safety devices, certain residual risks cannot be

avoided. These are:

– Impairment of hearing.

– Risk of accidents caused by the uncovered

parts of the rotating cutting disc.

– Risk of injury when changing the disc.

– Risk of squeezing fingers when opening the

guards.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D28720 T 1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt D28720 T 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info