Bedienungsanleitung DeWalt D28886 T 1 (Seite 19 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

548811

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

17 Do not abuse cord

Never carry the tool by its cord. Never pull the

cord to disconnect from the socket. Keep the

cord away from heat, oil and sharp edges.

18 Store idle tools

When not in use, tools must be stored in a dry

place and locked up securely, out of reach of

children.

19 Maintain tools with care

Keep the tools in good condition and clean for

better and safer performance. Follow the

instructions for maintenance and changing

accessories. Keep all handles and switches dry,

clean and free from oil and grease.

20 Repairs

This tool is in accordance with the relevant safety

regulations. Have your tool repaired by an

authorised DEWALT repair agent. Repairs should

only be carried out by qualified persons using

original spare parts; otherwise this may result in

considerable danger to the user.

Additional safety rules for grinders

• Your grinder has been designed for grinding and

cutting masonry and steel.

Do not cut or grind light metal with a

magnesium content exceeding 80%

since this type of metal is flammable.

• The max. allowable speed of the grinding wheel

or cutting accessory, or any other suitable

accessory, must always be equal to or greater

than the no-load speed of the tool specified on

the nameplate.

• Do not cut workpieces requiring a maximum depth

of cut exceeding that of the cutting accessory.

• Always use accessories with a shank diameter

corresponding to the size of the collet installed in

your tool.

• Do not use grinding and cutting accessories that

do not conform to the dimensions stated in the

technical data.

• Inspect grinding and cutting accessories before

each use. Do not use chipped, cracked or

otherwise defective accessories.

• Ensure that the grinding or cutting accessory is

mounted correctly before use.

• Let the tool run at no-load in a safe position for at

least 30 seconds.

If there is a considerable vibration or if any other

defect occurs, stop the tool and check it to

determine the cause.

• Check that the workpiece is properly supported.

• Do not operate this tool without the switch guard

in place.

• Do not operate the tool near flammable liquids,

gases or dust. Sparks or hot chips from cutting

or arcing motor brushes may ignite combustible

materials.

• Do not operate the tool while standing in line with

the accessory. Keep other persons away from

the work area.

• Do not use cutting discs for side grinding.

• Do not operate the spindle lock while the tool is

running.

• Beware that after switching off the tool the wheel

continues to rotate for a short period.

• Always store grinding and cutting accessories in

a dry place.

Package contents

The package contains:

1 Straight grinder

1 Spanner (13 mm) (D28885)

1 Spanner (19 mm)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your straight grinder D28885/D28886 has been

developed for professional grinding and cutting

applications.

1 On/off switch

2 Switch guard

3 Spindle lock (D28886)

4 Collet nut

5 Speed control dial (D28886)

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D28886 T 1 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt D28886 T 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info