Bedienungsanleitung DeWalt D51275K T 3 (Seite 20 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546463

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

NAILER D51256/D51275

Congratulations!

You have chosen a DEWALT tool. Years of

experience, thorough product development and

innovation make DEWALT one of the most reliable

partners for professional power tool users.

Technical data

D51256 D51275

Sound pressure (L

) dB(A) < 82 < 82

Acoustic power (L

) dB(A) < 95 < 95

Hand/arm weighted

vibration m/s

2.7 2.7

Recommended operating

pressure bar 4.9 - 8.3 4.9 - 8.3

Max. operating pressure bar 8.3 8.3

Air consumption per shot l 4.5 6.0

(at 6.9 bar) (at 6.9 bar)

Actuating mode contact contact

actuating actuating

Magazine angle 0° 34°

Fasteners

length mm 32 - 65 32 - 65

shank diameter mm 1.6 1.8

(16 gauge) (15 gauge)

angle 0° 34°

Weight kg 1.77 1.75

This value is a tool-related characteristic value and

does not represent the influence to the hand-arm-

system when using the tool. The influence to the

hand-arm-system when using the tool will for example

depend on the gripping force, the contact pressure

force, the working direction, the adjustment of energy

supply, the workpiece and the workpiece support.

EC-Declaration of conformity

D51256/D51275

DEWALT declares that these tools have been designed

in compliance with:

98/37/EC, EN 792-13, EN 12549, EN 12096

For more information, please contact DEWALT at the

address below, or refer to the back of the manual.

Director Engineering and Product Development

Horst Großmann

DEWALT, Richard-Klinger-Straße 40,

D-65510, Idstein, Germany

Safety instructions

When using tools, always observe the safety

regulations applicable in your country to reduce

the risk of personal injury. Read the following

safety instructions before attempting to operate

this product.

Keep these instructions in a safe place!

General

1 Keep work area clean

Cluttered areas and benches can cause accidents.

2 Consider work area environment

Do not expose tools to humidity. Keep work area

well lit. Do not use tools in the presence of

flammable liquids or gases.

3 Keep children away

Do not let children or visitors come into contact

with the tool. Supervision is required for those

under 16 years of age.

4 Store idle tools

When not in use, tools must be stored in a dry

place and locked up securely, out of reach of

children.

5 Dress properly

Do not wear loose clothing or jewellery. They can

be caught in moving parts. Preferably wear

rubber gloves and non-slip footwear when

working outdoors. Wear protective hair covering

to keep long hair out of the way.

6 Do not overreach

Keep proper footing and balance at all times.

7 Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

D51256.P65 28-12-2001, 09:2120

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D51275K T 3 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info