Bedienungsanleitung DeWalt D51321 T 2 (Seite 23 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546469

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

4. Store idle tools.

When not in use, tools must be stored in a dry

place and locked up securely, out of reach of

children.

5. Dress properly.

Do not wear loose clothing or jewellery. They

can be caught in moving parts. Preferably wear

rubber gloves and non-slip safety footwear. Wear

protective hair covering to keep long hair out of

the way.

6. Do not overreach.

Keep proper footing and balance at all times.

7. Stay alert.

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

8. Use appropriate tool.

The intended use is described in this instruction

manual. Do not force small tools or attachments

to do the job of a heavy-duty tool. The tool will

do the job better and safer at the rate for which it

was intended.

WARNING ! The use of any accessory or

attachment or performance of any operation with

this tool, other than those recommended in this

instruction manual, may present a risk of personal

injury.

9. Maintain tools with care.

Keep the tools in good condition and clean

for better and safer performance. Follow the

instructions for maintenance and changing

accessories. Keep all controls dry, clean and free

from oil and grease.

10. Check for damaged parts.

Before using the tool, carefully check it for damage

to ensure that it will operate properly and perform

its intended function. Check for misalignment and

seizure of moving parts, breakage of parts and

any other conditions that may affect its operation.

Have damaged guards or other defective parts

repaired or replaced as instructed.

11. Have your tool repaired by an authorised

EWALT repair agent.

This tool is in accordance with the relevant safety

regulations. To avoid danger, tools must only be

repaired by qualified technicians.

Additional safety instructions for pneumatic tools

• Use quick-action couplings for connection to

the compressed air system. The non-sealable

nipple must be ﬁ tted to the tool in such a way

that no compressed air remains in the tool after

disconnection.

• Always use clean, dry compressed air. Do not

use oxygen or combustible gases as an energy

source for this tool.

• Only connect this tool to an air supply where

the maximum allowable pressure of the tool

cannot be exceeded by more than 10%. In case

of higher pressures, a pressure reducing valve

including a downstream safety valve shall be built

into the compressed air supply.

• Only use hoses with a rating exceeding the

maximum operating pressure of the tool.

• Before transporting the tool, disconnect it from

the compressed air system, especially where

ladders are used or where unusual physical

posture is adopted while moving.

• Disconnect the tool from the air supply when it is

not in use.

Additional safety instructions for fastener

driving tools

• Always wear safety glasses.

• Always wear ear protection.

• Never load fasteners with the trigger activated.

• Only use fasteners of the type speciﬁ ed in the

manual.

• Do not use any stands for mounting the tool to a

support.

• Do not disassemble or block any parts of the

fastener driving tool such as the safety yoke.

• Prior to each operation check that the safety and

triggering mechanism is functioning properly and

that all nuts and bolts are tight.

• Do not use the equipment as a hammer.

• Never point any operational fastener driving tool

at yourself or at any other person. Do not use the

tool in applications requiring operation close to

the body.

• While working, hold the tool in such a way that

no injuries can be caused to the head or to the

body in the event of a possible recoil due to a

disruption in the energy supply or hard areas

within the workpiece.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D51321 T 2 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info