546145
25
Zoom out
Zoom in
Vorherige Seite
1/112
Nächste Seite
ENGLISH
23
MITRE SAW DW712, DW712N
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional power tool users.
Technical Data
DW712 DW712N
Sound pressure (L
pA
) dB(A) 90
90
Acoustic power (L
WA
) dB(A) 103
103
Hand/arm weighted vibration m/s
2
< 2.5 < 2.5
Voltage V 230 230
(UK & Ireland only) V 230/115 230/115
Power output W 1600 1600
Current input (230V) A 8 8
Current input (115V) A 16 16
Blade diameter mm 216 216
Blade bore mm 30 30
Max. blade thickness mm 1.8 1.8
Blade speed min-
1
3,500–4,600 5,400
Max. crosscut capacity at 90˚ mm 300 300
Max. mitre cut capacity at 45˚ mm 212 212
Max. depth of cut 90˚ mm 70 70
Max. depth of bevel cross-cut 45˚ mm 50 50
Mitre (max. positions)
left 50˚ 50˚
right 60˚ 60˚
Bevel (max. positions)
left 48˚ 48˚
right 2˚ 2˚
0° mitre
Resulting width at max. height 70 mm mm 300 300
Resulting height at max. width 300 mm mm 70 70
45° mitre left
Resulting width at max. height 70 mm mm 212 212
Resulting height at max. width 212 mm mm 70 70
45° mitre right
Resulting width at max. height 70 mm mm 212 212
Resulting height at max. width 212 mm mm 70 70
45° bevel left
Resulting width at max. height 50 mm mm 300 300
Resulting height at max. width 300 mm mm 50 50
31.62° mitre, 33.85° bevel
Resulting height at max. width 254 mm mm 65 65
Blade stopping time s < 10 < 10
Dust collection efficiency mg/m < 2.0 < 2.0
Weight kg 19.0 19.0
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
EC-Declaration of conformity
DW712/DW712N
DEWALT declares that these products described under “technical data”
have been designed in compliance with:
98/37/EEC, 89/336/EEC, EN 55014-2, EN 55014, EN 61000-3-2,
EN 61000-3-3 & EN 61029.
For more information, please contact DEWALT at the following address
or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of DEWALT.
TUV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stin 1
D-51105 Köln
Germany
Horst Grossmann
Vice President Engineering and Product Development
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DeWalt D712N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info