Bedienungsanleitung DeWalt DC232 (Seite 36 von 168) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

446534

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

ENGLISH

1 Keyless chuck (DC229/DC234)

1 Battery pack (DC228/DC229/DC232K/DC234K)

2 Battery packs (DC229KL/DC232KL/DC234KL)

1 Charger

1 Kitbox (K-models only)

1 Instruction manual

1 Exploded drawing

Note: Battery packs and chargers are not included

with N-models.

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. A)

WARNING: Never modify the power tool

or any part of it. Damage or personal

injury could result.

INTENDED USE

Your cordless rotary hammer drill DC228/DC232

has been designed for professional drilling,

hammer drilling and screwdriving applications.

Your cordless rotary hammer drill DC229/DC234

has been designed for professional drilling,

hammer drilling and screwdriving applications as

well as for light chipping.

DO NOT use under wet conditions or in presence

of ﬂ ammable liquids or gases.

These heavy-duty rotary hammer drills are

professional power tools. DO NOT let children

come into contact with the tool. Supervision is

required when inexperienced operators use this

tool.

1 Variable speed switch

2 Forward/reverse slider

3 Mode selector

4 Safety lock

5 Tool holder

6 Locking collar

7 Dust cover

8 Depth adjustment rod

9 Side handle

10 Grip

11 Battery pack

Charger

Your DE9000 charger accepts D

E WALT Li-Ion

battery packs of 36 V (DE9360) and 28 V (DE9280)

at 2.2 Ah.

11 Battery pack

12 Release button

13 Charger

14 Charging indicators (red)

Overload clutch

In case of jamming of a drill bit, the drive to the

drill spindle is interrupted. Because of the resulting

forces, always hold the tool with both hands and

take a ﬁ rm stance.

Brake mechanism

When the variable speed switch is released,

the spindle will stop rotating instantly.

Active vibration control

The active vibration control neutralises rebound

vibration from the hammer mechanism. Lowering

hand and arm vibration, it allows more comfortable

use for longer periods of time and extends the

life of the unit. In operation, a spring loaded

mechanism counterbalances the vibration forces.

This can be sensed by the cushioning effect when

pressure is applied to the tool. Make sure the

spring is engaged but not too ﬁ rmly.

The mechanism should be allowed to 'ﬂ oat'.

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the battery pack

voltage corresponds to the voltage on the rating

plate. Also make sure that the voltage of your

charger corresponds to that of your mains.

Your D E WALT charger is double

insulated in accordance with EN 60335.

Mains plug replacement

(U.K. & Ireland only)

• Should your mains plug need replacing and you

are competent to do this, proceed as instructed

below. If you are in doubt, contact an authorized

D e WALT repair agent or a qualiﬁ ed electrician.

• Disconnect the plug from the supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DC232 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DC232

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info