Bedienungsanleitung DeWalt DC27902 T 1 (Seite 15 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

549667

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

– 3

Caution

The flat pleated filter must must always be

in place while vacuuming.

– If wet dirt is vacuumed with the uphol-

stery or crevice nozzle, or if water is

sucked up from a container, it is recom-

mended to deactivate the "automatic fil-

ter cleaning" function.

– If the maximum liquid level is reached

the appliance will turn off automatically.

– In case of non-conductive liquids

(such as emulsion drilling fluids,

oils, and greases) the appliance is

not turned off when the container is

full. The filling level must be continu-

ously monitored and the container

must be emptied in time.

– After the wet vacuuming: Clean the flat

folded filter with the filter cleaning.

Clean the electrodes with a brush.

Clean the container with a damp rag

and dry it.

Illustration

The suction hose is equipped with a clip

system. All C-35/C-DN-35 accessories can

be connected.

 Plug in the main plug.

 Switch on the appliance at the main

switch.

 Set the suction output (min - max) at the

rotary switch.

Not applicable to the D27902-LX, 115V

version

ƽ Danger

Risk of injury and damage! The socket out-

let is only for the connection of power tools

to the vacuum cleaner. Any other use of the

socket outlet is not permitted.

 Connect the mains plug of the electric

power tool to the vacuum cleaner.

 Switch on the appliance at the main

switch.

Indicator lamp is on; vacuum cleaner is in

the standby mode.

Note: The vacuum cleaner is turned on and

off automatically with the electric power tool.

Note: The vacuum cleaner starts automat-

ically within 0.5 seconds and continues to

run for 15 seconds after the power tool has

being switched off.

Note: Please refer to "Technical specifica-

tions" for the power connection specifica-

tions of the power tools.

Illustration

 Adjust the stepped power tool adaptor

to fit the connection of the electric pow-

er tool.

Illustration

 Remove the elbow from the suction hose.

 Attach the stepped power tool adaptor

to the suction hose.

Illustration

 Connect the adaptor to the electric pow-

er tool.

The appliance has an innovative filter

cleaning system that is particularly effective

with fine dust. The flat pleated filter is auto-

matically cleaned every 15 seconds

through an air jet (pulsating sound).

Note: Automatic filter dedusting is switched

on at the factory.

Note: The automatic filter dedusting func-

tion can only be switched on/ off when the

appliance is switched on.

– To switch off automatic filter cleaning:

General

Clip connection

Operation

Turning on the Appliance

Adjust the suction output

Working with electrical power tools

Automatic filter cleaning

15EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DC27902 T 1 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DC27902 T 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info