Bedienungsanleitung DeWalt DC822 (Seite 41 von 184) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

446488

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

ENGLISH

Forward/Reverse Control Button

(ﬁ g. 1)

A forward/reverse control button (b) determines the

direction of the tool and also serves as a lock off

button.

To select forward rotation, release the trigger

switch and depress the forward/reverse control

button on the right side of the tool.

To select reverse, depress the forward/reverse

control button on the left side of the tool.

The center position of the control button locks the

tool in the OFF position. When changing the position

of the control button, be sure the trigger is released.

NOTE: The first time the tool is run after changing

the direction of rotation, you may hear a click on

start up. This is normal and does not indicate a

problem.

Worklight (ﬁ g. 1)

There is a worklight (g) located just above the trigger

switch (a). The worklight will be activated when the

trigger switch is squeezed.

NOTE: The worklight is for lighting the immediate

work surface and is not intended to be used as a

flashlight.

Quick-Release Chuck (ﬁ g. 4)

DC825, DC827, DC835, DC837, DC845

NOTE: The chuck accepts 1/4" hex accessories

only.

Place the switch in the locked off (center) position or

remove battery pack before changing accessories.

To install an accessory, pull the chuck collar (c)

away from the front of the tool, insert the accessory

and release the collar. The accessory is locked in

place.

To remove an accessory, pull the chuck collar

away from the front of the tool. Remove the

accessory and release the collar.

Anvil With Detent Pin (ﬁ g. 5)

DC820, DC822, DC830, DC832, DC840

Place the switch in the locked off (center) position or

remove battery pack before changing accessories.

To install a socket on the anvil, align the hole in

the side of the socket with the detent pin (e) on the

anvil (f). Press the socket on until the detent pin

engages in the hole. Depression of detent pin may

be necessary to aid installation of socket.

CAUTION: Use only impact sockets.

Non-impact sockets may break and

cause a hazardous condition. Inspect

sock et prior to use to ensure that it

con tains no cracks.

To remove a socket, depress the detent pin

through the hole and pull the socket off.

Usage

Your impact tool generates the following output

torque:

Cat # Ft.-Lbs. In.-Lbs. Nm

DC820 145 1740 195

DC822 145 1740 195

DC825 111 1330 150

DC827 111 1330 150

DC830 135 1620 180

DC832 135 1620 180

DC835 103 1240 140

DC837 103 1240 140

DC840 120 1440 160

DC845 96 1150 130

CAUTION: Ensure fastener and/or

system will withstand the level of torque

generated by the tool. Excessive torque

may cause breakage and possible

personal injury.

1. Place the socket on the fastener head. Keep

the tool pointed straight at the fastener.

2. Press switch to start operation. Always check

torque with a torque wrench, as the fastening

torque is affected by many factors including the

following:

• Voltage: Low voltage, due to a nearly

discharged battery, will reduce fastening

torque.

• Socket size: Failure to use the correct

socket size will cause a reduction in fastening

torque.

• Bolt Size: Larger bolt diameters generally

require higher fastening torque. Fastening

torque will also vary according to length,

grade, and torque coefficient.

• Bolt: Ensure that all threads are free of rust

and other debris to allow proper fastening

torque

• Material: The type of material and surface

finish of the material will affect fastening

torque.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DC822 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info