669510
28
Zoom out
Zoom in
Vorherige Seite
1/152
Nächste Seite
26
ENGLISH
English (original instructions)
BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER, DCD791
BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER/HAMMERDRILL, DCD796
Congratulations!
You have chosen a
DeWALT
tool. Years of experience, thorough
product development and innovation make
DeWALT
one of the
most reliable partners for professional power toolusers.
Technical Data
DCD791 DCD796
Voltage
V
DC
18 18
Type
1/10 1/10
Battery type
Li-Ion Li-Ion
Power output
W 460 460
No-load speed
1st gear min
-1
0–550 0–550
2nd gear min
-1
0–2000 0–2000
Impact rate
1st gear min
-1
0–9,350
2nd gear min
-1
0–34,000
Max. torque (hard/soft) Nm 70/27 70/27
Chuck capacity mm 1.5–13.0 1.5–13.0
Maximum drilling capacity
Wood mm 40 40
Metal mm 13 13
Masonry mm 13
Weight (without battery pack) kg
1.1 1.2
Noise values and vibration values (triax vector sum) according to EN60745-2-1:
L
PA
(emission sound pressure level) dB(A)
76 89
L
WA
(sound power level) dB(A)
87 100
K (uncertainty for the given sound level) dB(A)
3 3
Drilling into metal
Vibration emission value a
h,D
= m/s
2
<2.5 <2.5
Uncertainty K = m/s
2
1.5 1.5
Drilling into concrete
Vibration emission value a
h,ID
= m/s
2
11.5
Uncertainty K = m/s
2
1.6
Screwdriving
Vibration emission value a
h,D
= m/s
2
<2.5 <2.5
Uncertainty K = m/s
2
1.5 1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of workpatterns.
EC-Declaration of Conformity
Machinery Directive
Brushless Cordless Compact Drill Driver/
Hammerdrill
DCD791, DCD796
DeWALT
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010,
EN60745-2-2:2010.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DeWALT
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DeWALT
.
Markus Rompel
Director Engineering
DeWALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
22.06.2017
WARNING: To reduce the risk of injury, read the
instructionmanual.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DeWalt DCD791 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info