Bedienungsanleitung DeWalt DCF813 T 3 (Seite 6 von 16) (Englisch)

549695

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

V ......................volts A .........................amperes

Hz ....................hertz W ........................watts

min ..................minutes

or AC ............alternating current

or DC .....direct current or AC/DC ......alternating or

...................Class I Construction ...........................direct current

........................(grounded) no .......................no load speed

...................Class II Construction n .........................rated speed

........................(double insulated) .......................ear thing terminal

…/min .............per minute .......................safety alert symbol

BPM .................beats per minute IPM .....................impacts per minute

RPM .................revolutions per minute SPM ....................strokes per minute

sfpm ................surface feet per minute

Important Safety Instructions for All Battery Packs

When ordering replacement battery packs, be sure to include catalog number and

voltage. Consult the chart at the end of this manual for compatibility of chargers and

battery packs.

The battery pack is not fully charged out of the carton. Before using the battery pack

and charger, read the safety instructions below. Then follow charging procedures

outlined.

READ ALL INSTRUCTIONS

• Do not charge or use battery in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Inserting or removing the battery

from the charger may ignite the dust or fumes.

• Never force battery pack into charger. Do not modify battery pack in any

way to fit into a non-compatible charger as battery pack may rupture

causing serious personal injury. Consult the chart at the end of this manual for

compatibility of batteries and chargers.

• Charge the battery packs only in DEWALT chargers.

• DO NOT splash or immerse in water or other liquids.

• Do not store or use the tool and battery pack in locations where the

temperature may reach or exceed 40 ˚C (105 ˚F) (such as outside sheds or

metal buildings in summer).

WARNING: We recommend the use of a residual current device with a residual

current rating of 30mA or less.

WARNING: ALWAYS wear approved protective safety equipment complying with

the following standards:

• Eye protection: AS/NZS1337 Eye Protectors for Industrial Applications;

• Hearing protection: AS/NZS1270 Acoustics – Hearing Protection;

• Respiratory protection: AS/NZS1716 Respiratory Protective Devices.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these chemicals: work in a well ventilated area, and

work with approved safety equipment, such as those dust masks that are specially

designed to filter out microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing, grinding,

drilling, and other construction activities. Wear protective clothing and wash

exposed areas with soap and water. Allowing dust to get into your mouth, eyes,

or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which may cause

serious and permanent respiratory or other injury. Always use AS/NZS1716 approved

respiratory protection appropriate for the dust exposure. Direct particles away from

face and body.

WARNING: Always wear proper personal hearing protection that conforms to

AS/NZS1270 during use. Under some conditions and duration of use, noise from this

product may contribute to hearing loss.

CAUTION: When not in use, place tool on its side on a stable surface where it

will not cause a tripping or falling hazard. Some tools with large battery packs will

stand upright on the battery pack but may be easily knocked over.

• The label on your tool may include the following symbols. The symbols and their

definitions are as follows:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCF813 T 3 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DCF813 T 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info