Bedienungsanleitung DeWalt DCF815 T 2 (Seite 8 von 16) (Englisch)

549698

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Charging Procedure (Fig. 1)

1. Plug the charger into an appropriate outlet before inserting battery pack.

2. Insert the battery pack (F) into the charger, as shown in Figure 1, making sure

the pack is fully seated in charger. The red (charging) light will blink continuously

indicating that the charging process has started.

3. The completion of charge will be indicated by the red light remaining ON

continuously. The pack is fully charged and may be used at this time or left in the

charger.

Indicator Light Operation

Charge Indicators

Some chargers are designed to detect certain problems that can arise with battery

packs. Problems are indicated by the red light flashing at a fast rate. If this occurs,

re-insert battery pack into the charger. If the problem persists, try a different battery

pack to determine if the charger is OK. If the new pack charges correctly, then the

original pack is defective and should be returned to a service center or other collection

site for recycling. If the new battery pack elicits the same trouble indication as the

original, have the charger tested at an authorized service center.

HOT/COLD PACK DELAY

Some chargers have a Hot/Cold Pack Delay feature: when the charger detects a

battery that is hot, it automatically starts a Hot Pack Delay, suspending charging

until the battery has cooled. After the battery has cooled, the charger automatically

switches to the Pack Charging mode. This feature ensures maximum battery life. The

red light flashes long, then short while in the Hot/Cold Pack Delay mode.

LEAVING THE BATTERY PACK IN THE CHARGER

The charger and battery pack can be left connected with the charge indicator showing

Pack Charged.

WEAK BATTERY PACKS: Weak batteries will continue to function but should not be

expected to perform as much work.

FAULTY BATTERY PACKS: This charger will not charge a faulty battery pack. The

charger will indicate faulty battery pack by refusing to light or by displaying problem pack

or charger.

NOTE: This could also mean a problem with a charger.

Important Charging Notes

1. Longest life and best performance can be obtained if the battery pack is charged

when the air temperature is between 18 and 24 ˚C (65 and 75 ˚F). DO NOT

charge the battery pack in an air temperature below +4 ˚C (+40 ˚F), or above

+40 ˚C (+105 ˚F). This is important and will prevent serious damage to the

battery pack.

2. The charger and battery pack may become warm to touch while charging. This

is a normal condition, and does not indicate a problem. To facilitate the cooling

of the battery pack after use, avoid placing the charger or battery pack in a warm

environment such as in a metal shed, or an uninsulated trailer.

3. If the battery pack does not charge properly:

a. Check operation of receptacle by plugging in a lamp or other appliance;

b. Check to see if receptacle is connected to a light switch which turns power off

when you turn out the lights;

c. Move charger and battery pack to a location where the surrounding air

temperature is approximately 18–24 ˚C (65–75 ˚F);

d. If charging problems persist, take the tool, battery pack and charger to your

local service center.

4. The battery pack should be recharged when it fails to produce sufficient power

on jobs which were easily done previously. DO NOT CONTINUE to use under

these conditions. Follow the charging procedure. You may also charge a partially

used pack whenever you desire with no adverse affect on the battery pack.

5. Foreign materials of a conductive nature such as, but not limited to, grinding

dust, metal chips, steel wool, aluminum foil, or any buildup of metallic particles

should be kept away from charger cavities. Always unplug the charger from the

power supply when there is no battery pack in the cavity. Unplug charger before

attempting to clean.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCF815 T 2 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DCF815 T 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info