Bedienungsanleitung DeWalt DCMWSP564 (Seite 34 von 168) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790949

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

ENGLISH

Chargers

DeWALT chargers require no adjustment and are designed to be

as easy as possible tooperate.

Electrical Safety

The electric motor has been designed for one voltage only.

Always check that the battery pack voltage corresponds to the

voltage on the rating plate. Also make sure that the voltage of

your charger corresponds to that of yourmains.

iYour DeWALTcharger is double insulated in

accordance with EN60335; therefore no earth wire

isrequired.

If the supply cord is damaged, it must be replaced only by

DeWALT or an authorised serviceorganisation.

Mains Plug Replacement

(U.K.& Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the oldplug.

• Connect the brown lead to the live terminal in theplug.

• Connect the blue lead to the neutralterminal.

WARNING: No connection is to be made to the

earthterminal.

Follow the fitting instructions supplied with good quality plugs.

Recommended fuse: 3A.

Safety of Others

• This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the

appliance by a person responsible for theirsafety.

• Children must be supervised to ensure that they do not play

with theappliance.

• After striking a foreign object. Inspect the appliance for

damage and make repairs asnecessary.

Residual Risks

In spite of the application of the relevant safety regulations

and the implementation of safety devices, certain residual risks

cannot be avoided. These are:

• Injuries caused by touching any rotating/movingparts.

• Injuries caused when changing any parts, blades

oraccessories.

• Injuries caused by prolonged use of a tool. When using any

tool for prolonged periods ensure you take regularbreaks.

• Impairment ofhearing.

• Health hazards caused by breathing dust developed when

using your tool (example:- working with wood, especially oak,

beech and MDF.)

• Never pick up or carry an appliance while the motor isrunning.

SAVE THESE INSTRUCTIONS

to turn the lawn mower off and stop the blade when crossing

gravelsurfaces.

• Do not operate the lawn mower without the entire grass

collector, discharge guard, rear guard, or other safety

protective devices in place and working. Periodically check all

guards and safety protective devices to ensure they are in good

working order and will operate properly and perform their

intended function. Replace a damaged guard or other safety

device before furtheruse.

• Never leave a running lawn mowerunattended.

• Always release the bail bar to stop the motor and wait until

the blade comes to a complete stop before cleaning the lawn

mower, removing the grass bag, unclogging the discharge

guard, when leaving the lawn mower, or before making any

adjustments, repairs orinspections.

• Operate lawn mower only in daylight or good artificial light

when objects in the path of the blade are clearly visible from

the operating area of the lawnmower.

• Do not operate the lawn mower while under the influence of

alcohol or drugs, or when you are tired or ill. Always stay alert,

watch what you are doing, and use commonsense.

• Avoid dangerous environments. Never operate the lawn

mower in damp or wet grass, never use lawn mower in the

rain. Always be sure of your footing, walk, neverrun.

• If the lawn mower should start to vibrate abnormally, release

the bail bar, wait for the blade to stop and then check for

the cause immediately. Vibration is generally a warning of

trouble, see the Troubleshooting for advice in the case of

abnormalvibration.

• Always wear proper eye and respiratory protection when

operating the lawnmower.

• The use of any accessory or attachment not recommended

for use with this lawn mower could be hazardous. Only use

accessories approved byDeWALT.

• Never overreach while operating the lawn mower. Always

be sure to keep proper footing and balance at all times while

operating the lawnmower.

• Mow across the face of slopes, never up and down. Exercise

extreme caution when changing direction onslopes.

• Watch for holes, ruts, bumps, rocks or other hidden objects.

Uneven terrain could cause a slip and fall accident. Tall grass

can hideobstacles.

• Do not mow on wet grass or excessively steep slopes. Poor

footing could cause a slip and fallaccident.

• Do not mow near drop-offs, ditches, or embankments. You

could lose your footing orbalance.

• Always allow the mower to cool down beforestoring.

• Pull the plug from the socket and pull the battery pack from

the machine. Make sure that all moving parts have come to a

complete stop:

- Whenever you leave the machine;

- Before clearing a blockage;

- Before checking, cleaning or working on theappliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCMWSP564 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info