Bedienungsanleitung DeWalt DCR027 (Seite 10 von 14) (Englisch)

712268

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

• Young children and the infirm. This appliance is not

intended for use by young children or infirm persons

withoutsupervision.

• This product is not intended for use by persons (including

children) suffering from diminished physical, sensory or

mental abilities; lack of experience, knowledge or skills

unless they are supervised by a person responsible for their

safety. Children should never be left alone with thisproduct.

ASSEMBLY AND ADJUSTMENTS



WARNING: Use only

DeWALT

battery packs andchargers.

Inserting and Removing the Battery Pack

from the Charger/Radio (Fig. B)

NOTE: Make sure your battery pack

19

is fullycharged.

To Install the Battery Pack into the Unit

1. Align the battery pack

19

with the rails inside the charger/

radio's battery port (Fig.B).

2. Slide it in until the battery pack is firmly seated and ensure

that you hear the lock snap intoplace.

To Remove the Battery Pack from the Unit

1. Press the release button

20

and firmly pull the battery pack

out of the toolhandle.

2. Insert battery pack into the charger as described in the

charger section of thismanual.

Fuel Gauge Battery Packs (Fig. B)

Some

DeWALT

battery packs include a fuel gauge which

consists of three green LED lights that indicate the level of

charge remaining in the batterypack.

To actuate the fuel gauge, press and hold the fuel gauge

button

21

. A combination of the three green LED lights will

illuminate designating the level of charge left. When the level

of charge in the battery is below the usable limit, the fuel gauge

will not illuminate and the battery will need to berecharged.

NOTE: The fuel gauge is only an indication of the charge left on

the battery pack. It does not indicate tool functionality and is

subject to variation based on product components, temperature

and end-userapplication.

To Install Coin Cell Battery (Fig. B)



WARNING: Danger of explosion if battery is incorrectly

replaced. When replacing battery, replace it with the

same or equivalent type CR2032. Observe correct polarity

(+ and –) when replacing batteries. Do not store or carry

batteries so that metal objects can contact exposed

batteryterminals.

1. On the battery door on the back of the unit, turn the

screw 

22

anti-clockwise to remove. Screw will remain

captive in thedoor.

2. Press down on the battery door latch and pull toopen.

3. Install the coin cell battery

23

according to the diagram

inside the coin cell batteryarea.

4. Replace the battery door, insert the screw andtighten.

NOTE: To reset the LCD display, clock, and pre-sets remove

the coin cell battery and re-install. Follow this procedure if the

screen seems to lock inplace.



DANGER: DO NOT INGEST BATTERY; CHEMICAL

BURN HAZARD. This product contains a coin/button cell

battery. If the coin/button cell battery is swallowed, it can

cause severe internal burns in just 2hours and can lead

todeath.

Keep new and used batteries away from children. If the

battery compartment does not close securely stop using

the product and keep it away fromchildren.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medicalattention.

OPERATION

Instructions for Use



WARNING: Always observe the safety instructions and

applicableregulations.

Your Bluetooth® charger/radio is equipped with memory

capacity in order to store the time and your selected memory

channels. When the radio is in the OFF position, this memory

capacity is powered by one coin cell battery that is included

with the charger/radio.

Power/Volume Adjustment

1. To turn the radio on, press the power button

1

NOTE: When the radio is first used it will enter 'DAB' mode

and automatically scan for stations. It will then set the time

and start playing the first station it finds. If there is no time

signal available please refer to To Program the Clock to

manually set thetime.

2. Turn the dial

2

clockwise to increase the volume. To

decrease the volume, turn anti-clockwise.

Mode Function

To choose one of the mode functions('DAB', 'FM', or 'AUX' or

Bluetooth®) push the mode button

6

until the desired function

isfound.

NOTE: Pressing the Bluetooth® button

13

also puts the radio

into Bluetooth®mode.

DAB Mode

Tuning

When the unit is first switched on the unit will start in

'DAB'/'DAB+' mode and will 'Auto Scan' to find broadcast

stations in the local area. Once 'Auto Scan' is complete, use the

left or right arrow buttons

to scroll through thestations.

NOTE: When moving locations or if reception was poor

in the original scan(possible if the antenna was not up),

this may result in an empty or incomplete list of available

stations. Manually running an 'Auto Scan' will find all available

broadcaststations.

To Perform an Auto Scan:

1. Press the menu button

10

, scroll through the options by

pressing the right arrow button

5

until you reach 'Auto

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCR027 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info