Bedienungsanleitung DeWalt dw 233 k qs (Seite 20 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

387243

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

en - 3 15

ENGLISH

17 Do not abuse cord

Never carry the tool by its cord or pull it to

disconnect from the socket. Keep the cord away

from heat, oil and sharp edges.

18 Maintain tools with care

Keep the tools in good condition and clean for

better and safer performance. Follow the

instructions for maintenance and changing

accessories. Inspect the tool cords at regular

intervals and, if damaged, have them repaired by

an authorized DEWALT repair agent. Inspect the

extension cords periodically and replace them if

damaged. Keep all controls dry, clean and free

from oil and grease.

19 Check for damaged parts

Before using the tool, carefully check it for

damage to ensure that it will operate properly

and perform its intended function.

Check for misalignment and seizure of moving

parts,breakage of parts and any other conditions

that may affect its operation. Have damaged

guards or other defective parts repaired or

replaced as instructed.

Do not use the tool if the switch is defective.

Have the switch replaced by an authorized

DEWALT repair agent.

20 Have your tool repaired by an authorized

DEWALT repair agent

This Power Tool is in accordance with the

relevant safety regulations. To avoid danger,

electric appliances must only be repaired by

qualified technicians.

Package contents

The package contains:

1 Heavy duty rotary drill

1 Side handle

1 Depth gauge

1 Kitbox

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your DEWALT drill has been designed for

professional drilling and screwdriving applications.

1 Variable speed switch

2 Lock-on button

3 Forward/reverse switch

4 Two gear selector

5 Side handle

6 Depth adjustment rod

7 Keyless chuck

8 Sleeve

Torque limiting clutch

All rotary drills are equipped with a torque limiting

clutch that reduces the maximum torque reaction

transmitted to the operator in case of jamming of a

drill bit. This feature also prevents the gearing and

electric motor from stalling. The torque limiting

clutch has been factory-set for heavy duty

performance and cannot be adjusted.

For safe operation, always use the side

handle, particularly when working in the

low speed/high torque position (1st gear).

Synchronized gear shifting mechanism

Your drill is equipped with a synchronized gear

shifting mechanism which allows to use the two gear

selector when the tool is switched OFF or running

under no load condition.

Electronic speed control

The electronic speed control offers the following

advantages:

- optimal tool control for accurate drilling

- easier screwdriving

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 50144; therefore no

earth wire is required.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt dw 233 k qs Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info