Bedienungsanleitung DeWalt dw 333k (Seite 30 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

382523

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

ENGLISH

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved

3–core extension cable suitable for the power

input of this tool (see technical data).The minimum

conductor size is 1.5 mm

; the maximum length is

30 m.

When using a cable reel, always unwind the cable

completely.

ASSEMBLY AND ADJUSTMENT

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-

ups or when making repairs. Be sure

the trigger switch is in the OFF position.

An accidental start-up can cause injury.

Fitting and removing a saw blade (fig. B)

The tool-free blade exchange system ensures quick

and easy changing of saw blades.

• Open the blade holder (7) by fully retracting the

blade latch (5).

• Insert the saw blade into the blade holder (7)

guiding the back of the blade into the groove of

the guide roller (8).

• Release the blade latch (5).

• To remove the saw blade, fully retract the blade

latch and pull the blade out of the holder.

Saw blades

Blade type Applications

Fine-toothed cutting blade for smooth straight cuts

Coarse-toothed cutting blade for fast straight cuts

Metal cutting blade for ferrous and non-

ferrous metals

Flush cutting blade* for finishing off cuts up to a

wall or edge.

* Not available in all countries.

A wide variety of dedicated saw blades is available

as an option.

WARNING: Always select your saw

blade with great care.

Setting the bevel angle (fig. C)

The adjustable shoe (9) allows cutting of LH and RH

bevel angles up to 45°. The bevel scale has preset

positions at 0°, 15°, 30° and 45°.

• Release the shoe lever (11).

• Slide the shoe (9) toward the saw blade.

• Tilt the shoe and set the desired bevel angle

using the scale.

• Tighten the shoe lever.

Setting the pendulum stroke (fig. A)

The adjustable pendulum stroke guarantees a

perfect cutting stroke for different materials.

• Slide the selector (10) to the desired position

referring to the table below. The selector can be

manipulated during operation.

Pos. Wood Metal Plastics

3 Fast cuts - PVC

2 Thick workpieces - Fibreglass

Acrylic

1 Plywood Aluminium -

Chipboard Non-ferrous -

0 Thin workpieces Sheet metal -

Fine cuts

Setting the sawdust blower (fig. A)

The sawdust blower conducts an adjustable stream

of air to the saw blade to keep the workpiece clear

of sawdust during operation.

• Set the sawdust blower using the lever (4).

- Low For working with metals, when

using coolants and lubricants

and for use with dust extraction.

- Intermediate For working with wood and

similar materials in low speed.

- High For working with wood and

similar materials in high speed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt dw 333k Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info