Bedienungsanleitung DeWalt dw 492 (Seite 20 von 79) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

390424

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your DEWALT Angle Grinder (with or without

Diamond Guard) has been designed for professional

grinding and cutting applications.

1 ON/OFF-switch

2 Unlocking switch (U.K. & France only)

2a Locking switch

3 Guard

4 Spindle lock

5 Spindle

6 Side handle

7 Top hole

8 Side holes

9 Carbon brush covers

DW478, DW492 & DW491K - Soft Start Feature

The soft start feature allows a slow speed build-up

to avoid an initial jerk when starting.

This feature is particularly useful when working in

confined spaces.

Electrical safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 50144; therefore no

earth wire is required.

Mains plug replacement

(U.K. & Ireland only)

• Should your mains plug need replacing and you

are competent to do this, proceed as instructed

below. If you are in doubt, contact an authorized

DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug

with bared copper conductors is dangerous if

engaged in a live socket outlet.

• Only fit 13 Amperes BS1363A approved plugs

fitted with the correctly rated fuse (1).

• The cable wire colours, or a letter, will be marked

at the connection points of most good quality

disconnect from the socket. Keep the cord away

from heat, oil and sharp edges.

18 Maintain tools with care

Keep the tools in good condition and clean for better

and safer performance. Follow the instructions for

maintenance and changing accessories. Inspect the

tool cords at regular intervals and, if damaged, have

them repaired by an authorized DEWALT repair

agent. Inspect the extension cords periodically and

replace them if damaged. Keep all controls dry,

clean and free from oil and grease.

19 Check for damaged parts

Before using the tool, carefully check it for damage

to ensure that it will operate properly and perform

its intended function. Check for misalignment and

seizure of moving parts, breakage of parts and any

other conditions that may affect its operation. Have

damaged guards or other defective parts repaired

or replaced as instructed.

Do not use the tool if the switch is defective.

Have the switch replaced by an authorized

DEWALT repair agent.

20 Have your tool repaired by an authorized

DEWALT repair agent

This Power Tool is in accordance with the

relevant safety regulations. To avoid danger,

electric appliances must only be repaired by

qualified technicians.

Additional safety rules for grinding wheels and

cutting disks

• Use fiber reinforced grinding wheels and cutting

disks in conformity with ISO 2933-1974 with a

diameter corresponding to the wheel diameter

specified in the technical data only.

Package contents

The package contains:

1 Angle Grinder

1 Guard

1 Diamond guard with dust extraction outlet

(EZWS97) (DW491K only)

1 Round handle (DW491K only)

1 Side handle

1 Two-pin spanner

1 Metal case (K-models only)

1 Instruction manual

1 Exploded drawing

en - 3

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt dw 492 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt dw 492

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info