Bedienungsanleitung DeWalt dw 615 qs (Seite 26 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

426924

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

1 Guide bush 17 mm ø

1 Dust extraction channel

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁ g. A)

WARNING: Never modify the power

tool or any part of it. Damage or

personal injury could result.

1. On/off switch

2. Routing depth graduation

3. Depth stop

4. Plunge limiter

5. Depth stop locking bolt

6. Revolver depth stop

7. Spindle lock

8. Collet nut

9. Dust extractor

10. Parallel fence locking bolt

11. Router base

12. Speed control dial (DW615)

INTENDED USE

Your DEWALT high performance router DW614,

DW615 has been designed for professional heavy

duty routing applications.

DO NOT use under wet conditions or in presence of

flammable liquids or gases.

This router is a professional power tool.

DO NOT let children come into contact with the

tool. Supervision is required when inexperienced

operators use this tool.

Electrical Safety

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

Your DEWALT tool is double insulated in

accordance with EN 60745; therefore no

earth wire is required.

WARNING: 115 V units have to

be operated via a fail-safe isolating

transformer with an earth screen

between the primary and secondary

winding.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

EWALT service organisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in

the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved

extension cable suitable for the power input of this

tool (see technical data). The minimum conductor

size is 1 mm

; the maximum length is 30 m.

When using a cable reel, always unwind the cable

completely.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-

ups or when making repairs. Be sure

the trigger switch is in the OFF position.

An accidental start-up can cause injury.

Cutters

The tooling can be used with the complete range

of commercial cutters (e.g: straight, rebate, profile

cutter, slotter cutter or grooved knife) with the

following technical data:

1. Shank diameter 6 mm—8 mm

2. Cutter speed of min. 30,000/min

WARNING: DW614, DW615 max

diameter to use:

• Straight, rabbet or profile cutter with a

max shank diameter of 8 mm, a max

diameter of 36 mm and a max cutting

depth of 10 mm;

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt dw 615 qs Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info