Bedienungsanleitung DeWalt dw 629 qs (Seite 29 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

426998

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

ENGLISH

d) Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a rotating

part of the power tool may result in personal

injury.

e) Do not overreach. Keep proper

footing and balance at all times. This

enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce

dust-related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job

better and safer at the rate for which it

was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories, or

storing power tools. Such preventive safety

measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc., in accordance with these

instructions taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Additional Speciﬁ c Safety Rules for

Routers

• Hold power tool by insulated gripping

surfaces, because the cutter may contact

its own cord. Cutting a "live" wire may make

exposed metal parts of the power tool "live" and

shock the operator.

• Use clamps or another practical way to

secure and support the workpiece to a

stable platform. Holding the work by your

hand or agains the body leaves is unstable and

may lead to loss of control.

Additional Speciﬁ c Safety Rules for

Cutters

1. Always use cutters with a shank diameter

corresponding to the size of the collet installed

in your tool.

2. Always use cutters suitable for a speed of

30,000 min

-1

and marked accordingly.

3. Never use cutters with a diameter exceeding

the maximum diameter indicated in the

technical data.

Cutters

The tooling can be used with the complete range

of commercial cutters (e.g: straight, rebate, profile

cutter, slotter cutter or grooved knife) with the

following technical data:

1. Allowed shank diameter 6 mm–12.7 mm

2. Approved speed of cutter min. 30,000/min

WARNING: DW629 max diameter to

use:

• Straight, rabbet or profile cutter with

max shank diameter (12.7 mm), Max

diameter 50 mm, Max cutting depth

10 mm.

• Slotter cutter with max shank diameter

(12.7 mm), Max diameter 25 mm.

• Grooved knife with max shank

diameter (12.7 mm), Max diameter

40 mm and 4 mm cutting width.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt dw 629 qs Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info