Bedienungsanleitung DeWalt dw 831 qs (Seite 36 von 164) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

390566

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

Prior to Operation

• Install the appropriate guard and disk or wheel.

Do not use excessively worn disks or wheels.

• Be sure the spacer and threaded flange are

mounted correctly.

• Make sure the disk or wheel rotates in the

direction of the arrows on the accessory and the

tool.

• Do not use cutting-off wheels for side grinding.

• Ensure that sparks resulting from use do not

create hazard e.g. do not hit persons, or ignite

flammable substances.

OPERATION

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories. Before

reconnecting the tool, depress and

release the trigger switch to ensure that

the tool is off.

Instructions for Use

WARNING:

• Always observe the safety instructions

and applicable regulations.

• Ensure all materials to be ground or cut

are secured in place.

• Apply only a gentle pressure to the

tool. Do not exert side pressure on the

grinding wheel.

• Avoid overloading. Should the tool

become hot, let it run a few minutes

under no load condition.

• Check that mounted wheels are

correctly fitted according to the

instructions given in this manual.

• Ensure that blotters are used when they

are provided with the abrasive wheel

and when they are required.

• Do not use separate reducing bushings

or adapters to adapt large hole abrasive

wheels.

• Never use the tool without the guard in

place.

• Be aware, the wheel continues to rotate

after the tools is switched off.

WARNING:

• Ensure all materials to be ground are

secured in place.

• Apply only a gentle pressure to the tool.

Do not exert side pressure on the disc.

• Avoid overloading. Should the tool

become hot, let it run a few minutes

under no load condition.

Proper Hand Position (ﬁ g. H)

WARNING: To reduce the risk of serious

personal injury, ALWAYS use proper

hand position as shown.

WARNING: To reduce the risk of serious

personal injury, ALWAYS hold securely in

anticipation of a sudden reaction.

Proper hand position requires one hand on the side

handle (16), with the other hand on the body of the

tool, as shown in figure H.

Switching On and Off (ﬁ g. G)

WARNING: Before using tool, check that

the handle is tightened securely.

CAUTION: Hold the side handle and

body of the tool firmly to maintain control

of the tool at start up and during use

and until the wheel or accessory stops

rotating. Make sure the wheel has come

to a complete stop be fore laying the tool

down.

• To run the tool, press the lock-off button (2) and

the On/Off switch (1).

• To stop the tool, release the On/Off switch.

WARNING: Do not switch the tool On or

Off when under load.

Spindle Lock (ﬁ g. A)

The spindle lock (5) is provided to prevent the spindle

from rotating when installing or removing wheels.

Operate the spindle lock only when the tool is turned

off, unplugged from the power supply, and has come

to a complete stop.

NOTICE: To reduce the risk of damage

to the tool, do not engage the spindle

lock while the tool is operating. Damage

to the tool will result and attached

accessory may spin off possibly resulting

in injury.

To engage the lock, depress the spindle lock button

and rotate the spindle until you are unable to rotate

the spindle further.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt dw 831 qs Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info