Bedienungsanleitung DeWalt DW030PL (Seite 4 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

712352

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

GB Operation

1. Point the laser at the top of the tool (Figure A #1)

toward the wall whose distance you need to measure

(Figure C #1).

2. Click (Figure A #3) to turn the tool on and

display a laser dot on the wall (Figure C #1).

3. When the bottom of the tool is positioned at the

correct distance from the wall, click to take the

measurement (Figure C #2).

4. View the measurement on the display window

(Figure D #2).

Changing the Unit of Measure

Once the current measurement is taken, you can change

the unit of measure from decimal ft (6.21 ft) to fractional

ft (6'02"9/16), fractional ft to meters (1.894 m), meters to

inches (74 9/16 in), or inches to decimal ft.

To change the unit of measurement, press and hold

until you see the measurement change (2-3 seconds).

NOTE: If you continue to hold after the measurement

changes, the tool will turn off.

Re-measuring

If you need to take a new measu ement, click .

• The previous measurement (Figure D #2) will be

cleared from the display window.

• When you are ready to take the new measurement,

click .

Turning Off the Tool

The tool can be turned off in either of these ways:

• After taking a measurement, press and hold for

5 seconds (until the display window clears).

• If you do not use the tool for 45 seconds, it will

automatically turn off.

Three Year Limited Warranty

DeWALT will repair, without charge, any defects due to

faulty materials or workmanship for three years from

the date of purchase. This warranty does not cover part

failure due to normal wear or tool abuse. For further detail

of warranty coverage and warranty repair information,

visit www.DeWALT.com or call 1–800–4-DeWALT

(1–800–433–9258).This warranty does not apply to

accessories or damage caused where repairs have been

made or attempted by others. This warranty gives you

specific legal rights and you may have other rights which

vary in certain states or provinces.

In addition to the warranty, DeWALT tools are covered

by our:

1 YEAR FREE SERVICE

DeWALT will maintain the tool and replace worn parts

caused by normal use, for free, any time during the first

year after purchase.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of

your DeWALT Power Tool, Laser, or Nailer for any reason,

you can return it within 90 days from the date of purchase

with a receipt for a full refund - no questions asked.

RECONDITIONED PRODUCT: Reconditioned product

is covered under the 1 Year Free Service Warranty. The

90 Day Money Back Guarantee and the Three Year

Limited Warranty do not apply to reconditioned product.

FREE WARNING LABEL REPLACEMENT: If your

warning labels become illegible or are missing, call

1-800-4-DeWALT or visit your local service center for

a free replacement.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW030PL Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DW030PL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info