Bedienungsanleitung DeWalt DW099E (Seite 7 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

712349

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Subtracting Measurements

You can subtract one measurement from another.

Click (Figure

#5) to turn on the tool.

The tool will measure the distance from the bottom

of the tool to the wall or object (Figure

#1).

To measure from the top of the tool instead of the

bottom (Figure

#2), hold for 2 seconds.

On the display window, the tool icon will change

from

to (Figure

#5).

Point the laser at the top of the tool (Figure

#1)

toward the wall or object whose distance you need

to measure.

Click to measure the distance from the tool

to the wall or object.

Indicate that you want to subtract the next

measurement from this measurement.

• On the DW099E keypad, click

twice.

• On the DW099S keypad, click

twice.

Point the laser at the top of the tool toward the next

wall or object.

Click to measure the distance and subtract it

from the previous measurement.

View the difference between the two measurements

at the bottom of the display window (Figure

#3).

Changing the Unit of Measure

Once the current measurement is taken (the device is

not in Continuous Measure mode), you can change the

unit of measure from decimal ft (6.21 ft) to fractional ft

(6'02"

9/16), fractional ft to meters (1.894 m), meters to

inches (74

9/16 in), or inches to decimal ft.

• On the DW099E keypad, click

(Figure

#3).

• On the DW099S keypad, hold

(Figure

#1) until you see the measurement

change (2-3 seconds).

Using Your DW099S With

If you have a DW099S, you can use its Bluetooth

capability to pair it with the DeWALT Tool Connect

application on your cell phone or tablet, and then record

accurate measurements in your floor plans.

From either or , download

the DeWALT Tool Connect application to your cell

phone or tablet.

Using the DeWALT Tool Connect application,

capture the room or space for which you want to

record the measurements, and build your floor plan.

On the DW099S keypad, click to turn on the

tool.

If the Bluetooth

icon does not appear on the

display window (Figure

#6), click on the

keypad to turn on Bluetooth

Use the DeWALT Tool Connect application to pair

your cell phone or tablet to the DW099S.

Use the DW099S to measure each wall in the room

or space captured in the floor plan, and sync the

measurements to the floor plan.

Using the DeWALT Tool Connect application, save

the floor plan.

Once you have saved the floor plan, you can export it

to one of several different file formats, including PDF,

DXF, or JPG, and print it or email it to other people (your

realtor, home center, etc.).

“THE BLUETOOTH

WORD MARK AND LOGOS ARE

REGISTERED TRADEMARKS OWNED BY BLUETOOTH

SIG, INC. AND ANY USE OF SUCH MARKS BY DEWALT

INDUSTRIAL TOOL CO. IS UNDER LICENSE. OTHER

TRADEMARKS AND TRADE NAMES ARE THOSE OF THEIR

RESPECTIVE OWNERS.”

Turning Off the Tool

The tool can be turned off in either of these ways:

• Press and hold

for several seconds (until the

display window clears).

• If you do not use the tool for 90 seconds, it will

automatically turn off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW099E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info