Bedienungsanleitung DeWalt DW292 T 2 (Seite 25 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

551277

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

ENGLISH

WARNING: 115 V units have to

be operated via a fail-safe isolating

transformer with an earth screen between

the primary and secondary winding.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

EWALT service organisation.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in the

plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made

to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Using an Extension Cable

If an extension cable is required, use an approved

extension cable suitable for the power input of this

tool (see technical data). The minimum conductor size

is 1 mm

; the maximum length is 30 m.

When using a cable reel, always unwind the cable

completely.

Assembly and Adjustment

WARNING: Prior to assembly and

adjustment always unplug the tool.

Fitting and Removing Sockets

Your DW292 impact wrench uses a 1/2" square

drive system with detent pin.

Your DW294 impact wrench uses a 3/4" square

drive system with detent pin.

Fitting Sockets (ﬁ g. B)

● Align the hole (6) in the side of the socket with

the detent pin (5) on the anvil.

● Push the socket (4) onto the anvil (3) until it

snaps into place. Tap it lightly if required.

Removing Sockets (ﬁ g. C)

● Depress the detent pin (5) through the hole (6)

in the socket and pull the socket off the anvil.

Setting the Direction of Rotation (ﬁ g. D)

● Select forward or reverse rotation using the

forward/reverse switch (2).

WARNING: Always wait until the motor

has come to a complete standstill

before changing the direction of

rotation.

OPERATION

Instructions for Use

WARNING:

Always observe the safety instructions

and applicable regulations.

WARNING: To reduce the risk of

serious personal injury, turn tool off

and disconnect tool from power

source before making any

adjustments or removing/installing

attachments or accessories.

Screwdriving or Nutsetting (ﬁ g. A)

● Select the appropriate socket for the screw or

nut to be driven.

● Select forward or reverse rotation as described

above.

● Hold the tool in line with the fastener.

Proper Hand Position (ﬁ g. A, E)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the main

handle (8), as shown.

Switching On and Off (ﬁ g. A)

● To run the tool, press the on/off switch (1).

● To stop the tool, release the switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW292 T 2 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info