Bedienungsanleitung DeWalt DW394 T 4 (Seite 23 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546638

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

• Tighten the fixing screw (13) with the Allen key (9).

• Repeat this procedure for the other side handle.

Always operate the tool with the side

handles properly assembled.

Replacing the saw blades

Removing the saw blades (fig. C)

• Turn the tool upside down and remove the saw

blade guard (7).

• Loosen both saw blade fixing screws (8) with the

Allen key (9) until a click is heard.

• Unlock the top cover (17) by pressing the spring.

• Tilt back the top cover and pull the saw blades

out of the bar (6).

Fitting the saw blades (fig. D)

• Slide one saw blade into the bar (6) until its

slotted hole (16) is at approx. 5 cm from the top

cover (17).

• Insert the back of the saw blade into the housing

(10) until the threaded hole (14) lodges in the

required mounting position.

• Repeat this procedure for the other saw blade.

• Tilt the top cover (17) back in position and lock it.

• Using a piece of wood push on the toothed side

of the saw blades to make sure that they are

exactly parallel to the bar (6).

• Tighten both saw blade fixing screws (8) securely

by pressing and turning simultaneously with the

short end of the Allen key (9).

Before operation let the saw blades run

freely for approx. 20 s.

Instructions for use

• Always observe the safety instructions

and applicable regulations.

• Ensure the material to be sawn is

secured in place.

• Apply only a gentle pressure to the tool

and do not exert side pressure on the

saw blade.

• Avoid overloading.

Prior to operation (fig. A)

• Remove the saw blade guard (7).

• Mount the appropriate type of saw blade.

• Check that the tool is running properly and can

perform all its functions. Make sure that the bar (6)

is still straight and the saw blades (5) and the

housing (10) are undamaged.

Switching on and off (fig. A)

For safety reasons the on/off-switch (1) is equipped

with a lock-off button (2).

• Press the lock-off button (2) to unlock the tool.

• To run the tool, press the on/off-switch (1).

As soon as the on/off-switch is released the lock-

off switch is automatically activated to prevent

unintended starting.

• Always switch off the tool before unplugging.

Sawing (fig. A, E & F)

• Clamp the workpiece on one side only to prevent

the bar from jamming in the workpiece. Should

this happen, ease open the cut with wedges to

relieve the strain on the blade. Do not try to

wrench the saw free.

• Hold the tool by the front (3) and the side handle (4)

to guide it properly.

• Do not use the saw for cutting curves or pockets.

Make sure the bar end protrudes from the

workpiece.

• For long, straight cuts first draw a line on the

workpiece and follow the line.

• Make downward cuts only. Avoid cutting earth as

this will blunt the saw blades very quickly.

• When using a saw horse always cut on the

outside of the saw horse arms.

• To increase performance and lifetime of the saw

blades regularly apply oil to the blades and in the

oil holes (11) (every 15-30 min.).

• Regularly check the saw blade fixing screws (8).

Sawing in cellular concrete and thermal building

blocks (fig. A)

Cellular concrete and thermal building

blocks contain lime and quartz sand.

To guarantee optimum performance,

the saw blades, the bar and the saw

blade guide slot (12) must be thoroughly

cleaned after use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW394 T 4 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info