Bedienungsanleitung DeWalt DW566KC (Seite 27 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

447144

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

• Do not mix or stir inflammable liquids

labelled accordingly.

Various types of SDS-plus

drill bits and adaptors

are available as an option.

Consult your dealer for further information on the

appropriate accessories.

Maintenance

Your DEWALT Power Tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

• The Rotary Hammer Drill is not user-serviceable.

Take the tool to an authorized DEWalt repair

agent after approximately 80 hours of use.

• The tool will automatically switch OFF when the

carbon brushes are worn.

Lubrication

Your Power Tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Unwanted tools and the environment

Take your tool to an authorized DEWALT repair

agent where it will be disposed of in an

environmentally safe way.

ENGLISH

en - 6

• Press the tool against the workpiece.

• Switch the tool ON by pressing the variable speed

switch (1). The hammer mechanism should run

smoothly and the tool should not bounce. If

necessary, increase the pressure on the switch.

Rotary drilling (fig. A)

• Select the rotary drilling mode (4).

• Proceed as described for hammer drilling. Special

SDS-plus

adaptors with threaded sections are

available for use with standard 10 or 13 mm

chucks to enable straight shank bits to be used.

Never use standard chucks in the

hammer drilling mode.

Screwdriving (fig. A)

• Select the rotary drilling mode (4).

• Select the direction of rotation (3).

• Insert the special SDS-plus

screwdriving

adaptor for use with hexagonal screwdriver bits.

• Insert the appropriate screwdriver bit into the

adaptor. When driving slotted head screws

always use bits with a finder sleeve.

• Gently press the variable speed switch (1) to

prevent damage to the screw head. In reverse

(LH) rotation the tool speed is automatically

reduced for easy screw removal.

DW566K/DW566KC - Chipping and chiselling

• To switch from hammer drilling to chiselling, first

insert the SDS-plus

chisel and check if it is

properly locked.

• When switching from hammer drilling mode to

chiselling mode, turn the chisel to the desired

position. If you find resistance during mode

change, turn the chisel slightly to engage the

spindle lock.

• The hammer is only for light chiselling

applications.

• The forward/reverse switch must be in

the forward position when chiselling (in

reverse the unit does not reach full

power).

• Do not use this tool to mix or pump

easily combustible or explosive fluids

(benzine, alcohol, etc.).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW566KC Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info