Bedienungsanleitung DeWalt DW630 (Seite 21 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546921

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

E N G L I S H

The correct power tool will do the job better and

safer at the rate for which it was designed.

b Do not use the power tool if the switch does

not turn it on and off.

Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

c Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce the

risk of starting the power tool accidentally.

d Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e Maintain power tools. Check for misalignment

or binding of moving parts, breakage of

parts and any other condition that may

affect the power tools operation. If damaged,

have the power tool repaired before use.

Many accidents are caused by poorly

maintained power tools.

f Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g Use the power tool, accessories and tool bits

etc., in accordance with these instructions,

taking into account the working conditions

and the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazardous

situation.

5 Service

a Have your power tool serviced by a qualiﬁed

repair person using only identical

replacement parts.

This will ensure that the safety of the power tool

is maintained.

Additional safety rules for sanders and

polishers

● The tool has been designed for polishing and

for sanding using the appropriate sanding discs.

Always observe the warnings, instructions,

images and data that have been supplied with

the tool. Non-observance of the information

may lead to risk of ﬁre, electric shock and

personal injury.

● This tool is not intended for grinding, wire-cup

grinding and cutting applications.

Any application for which the tool has not been

designed, may cause hazards and injuries.

● Do not use accessories that have not been

speciﬁed for this tool by the manufacturer.

Even if the accessory can be ﬁtted to your tool,

it does not guarantee safe use.

Do not sand or polish light metal with

a magnesium content exceeding 80%

since this type of metal is ﬂammable.

● Use the accessories recommended by the

manufacturer only.

● Do not use accessories that do not conform to

the dimensions stated in the technical data.

Do not use any spacers to make a disc ﬁt onto

the spindle.

● Ensure that the polishing or sanding accessory

is mounted correctly before use.

● Let the tool run at no-load in a safe position for

at least 30 seconds. If there is a considerable

vibration or if any other defect occurs, stop the

tool and check it to determine the cause.

● Do not operate the tool near ﬂammable liquids,

gases or dust. Sparks or hot chips from cutting

or arcing motor brushes may ignite combustible

materials.

● Do not operate the tool while standing in line

with the disc. Keep other persons away from

the work area.

● Ensure that the ventilation openings are kept

clear when working in dusty conditions. If it

should become necessary to clear the

ventilation openings, disconnect the tool from

the mains supply ﬁrst and avoid damaging the

internal parts by using non-metallic objects.

● Always wear eye and ear protection. Preferably

wear other personal protective equipment such

as dust mask, gloves and a helmet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW630 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DW630

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info