Bedienungsanleitung DeWalt DW709 T 2 (Seite 24 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544997

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

en - 3 17

Package contents

The package contains:

1 Assembled mitre saw (DW709)

1 Assembled table top mitre saw (DW711)

1 Parallel rip fence (DW711)

1 Guard for bench saw position (DW711)

1 Bottom guard for bench saw position (DW711)

1 Push stick (DW711)

1 Allen key 4 mm

1 Allen key 5 mm (DW711)

1 Allen key 6 mm

1 Two-pin spanner

1 Dust extraction adapter for top guard (DW711)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may have

occurred during transport.

• Take the time to thoroughly read and understand this manual prior to

operation.

• Remove the saw from the packaging material carefully.

• Release the head lock down knob to raise the head of the machine.

Description (fig. A1 - A4)

Your DEWALT saw has been developed for professional applications. This

high precision machine can be easily and quickly set to crosscut, bevel,

mitre, or compound mitre.

1 On/off switch

2 Head lock up release lever

3 Additional saw bench table locking knob (DW711)

4 Moveable lower blade guard

5 Fixed table

6 Blade slot

7 Positive stop lever

8 Mitre clamping knob

9 Rotating table/mitre arm

10 Mitre scale

11 Fence

12 Bevel clamp handle

13 Head lock down knob

14 Saw bench table (DW711)

15 Riving knife (DW711)

16 Upper saw blade guard (DW711)

17 Rip fence (DW711)

18 Fixed lower guard (for use in bench saw position) (DW711)

19 Attachment mounting holes

Optional accessories

20 Table end plate (DE3490)

21 Support guide rails 1000 mm (DE3494)

22 Material support plate (DE3495)

23 Material clamp (DE3499)

24 Swivelling stop (DE3462)

25 Adjustable stand 760 mm (max. height) (DE3477)

26 Legstand (DE3493)

27 Length stop for short workpieces (to be used with guide rails [21])

(DE3492)

28 Legstand (DE3493)

29 Roller table (DE3497)

Electrical safety

The electric motor has been designed for one voltage only. Always check

that the power supply corresponds to the voltage on the rating plate.

Mains plug replacement (U.K. & Ireland only)

• Should your mains plug need replacing and you are competent to do

this, proceed as instructed below. If you are in doubt, contact an

authorized DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug with bared copper

conductors is dangerous if engaged in a live socket outlet.

• Only fit 13 Amperes BS1363A approved plugs fitted with the correctly

rated fuse (1).

• The cable wire colours, or a letter, will be marked at the connection

points of most good quality plugs. Attach the wires to their respective

points in the plug (see below). Brown is for Live (L) (2), blue is for

Neutral (N) (4) and green/yellow is for Earth (E).

• Before replacing the top cover of the mains plug ensure that the cable

restraint (3) is holding the outer sheath of the cable firmly and that the

leads are correctly fixed at the terminal screws.

Never use a light socket.

Never connect the live (L) or neutral (N) wires to the earth pin

marked E or .

For 115 V units with a power rating exceeding 1500 W, we recommend to

fit a plug to BS4343 standard.

Using an extension cable

If an extension cable is required, use an approved extension cable suitable

for the power input of this machine (see technical data). The minimum

conductor size is 1.5 mm

. When using a cable reel, always unwind the

cable completely. Also refer to the table below.

Conductor size (mm

) Cable rating (Amperes)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Cable length (m)

7.5 15 25 30 45 60

Voltage Amperes Cable rating (Amperes)

230 0 - 2.0 6 6 6 6 6 6

2.1 - 3.4 6 6 6 6 6 6

3.5 - 5.0 6 6 6 6 10 15

5.1 - 7.0 10 10 10 10 15 15

7.1 - 12.0 15 15 15 15 20 20

12.1 - 20.0 20 20 20 20 25 -

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW709 T 2 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info