Bedienungsanleitung DeWalt DW712N T 3 (Seite 13 von 20) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546152

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

ENGLISH

Package Contents

The package contains:

1 Assembled mitre saw

1 Blade spanner

1 Saw blade

1 Material clamp

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may

have occurred during transport.

• Take the time to thoroughly read and understand this manual prior

to operation.

Description (ﬁ g. A1–A6)

WARNING: Never modify the power tool or any part of it.

Damage or personal injury could result.

1 On/off switch

2 Moveable lower guard

3 Fence left-hand side

4 Mitre lever

5 Mitre latch

6 Mitre scale

7 Fixed fence

8 Fence right-hand side

9 Bevel position adjustment stop

10 Bevel scale

11 Bevel clamp handle

12 Grooving stop

13 Rail lock knob

14 Head lock down pin

15 Grooving depth adjustment knob

16 Spindle lock button

17 Head lock up release lever

18 Operating handle

19 Speed control dial (DW712)

23 Upper guard

24 Dust spout

25 Rails

26 Blade spanner

27 Bevel stop override knob

28 Vertical position adjustment stop

29 Upper fence left-hand side clamping knob

30 Hand indentation

31 Kerf plate

32 Date code

OPTIONAL ACCESSORIES

35 Legstand

36 Dust extraction kit

37 Carrying strap

INTENDED USE

Your DEWALT DW712 Mitre Saw has been designed for professional

cutting wood, wood products and plastics. It performs the sawing

operations of cross-cutting, bevelling and mitring easily, accurately and

safely.

This unit is designed for use with a nominal blade diameter 216 mm

carbide tip blade.

DO NOT use under wet conditions or in presence of flammable liquids

or gases.

These miter saws are professional power tools.

DO NOT let children come into contact with the tool. Supervision is

required when inexperienced operators use this tool.

WARNING! Do not use the machine for purposes other

than intended.

• This product is not intended for use by persons (including children)

suffering from diminished physical, sensory or mental abilities; lack

of experience, knowledge or skills unless they are supervised by

a person responsible for their safety. Children should never be left

alone with this product.

Electrical Safety

The electric motor has been designed for one voltage only. Always

check that the power supply corresponds to the voltage on the rating

plate.

Your tool is double insulated in accordance with EN 61029;

therefore no earth wire is required.

WARNING: 115 V units have to be operated via a fail-safe

isolating transformer with an earth screen between the

primary and secondary winding.

In case of cord replacement the tool must only be repaired by an

authorized service agent or by qualified electrician.

Mains Plug Replacement

(U.K. & Ireland only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in the plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the earth

terminal.

Follow the fitting instructions supplied with good quality plugs.

Recommended fuse: 13 A.

Fitting a Mains Plug to 115 V Units

(U.K. and Ireland Only)

• The plug fitted should be comply with BS EN 60309 (BS4343),

16 Amps, earthing contact position 4h.

WARNING: Always ensure that the cable clamp is correctly

and securely fitted to the sheath of the cable.

Using an Extension Cable

If an extension cable is required, use an approved 3–core extension

cable suitable for the power input of this tool (see Technical Data).The

minimum conductor size is 1.5 mm

; the maximum length is 30 m.

When using a cable reel, always unwind the cable completely.

Installation

UNPACKING (FIG. B)

• Remove the saw from the packing material carefully.

• Release the rail lock knob (13), and push the saw head back to

lock it in the rear position.

• Press down the operating handle (18) and pull out the lock down

pin (14), as shown.

• Gently release the downward pressure and allow the head to rise to

its full height.

BENCH MOUNTING (FIG. C)

• Holes (40) are provided in all four feet to facilitate bench mounting.

Two different sized holes are provided to accommodate different

sizes of bolts. Use either hole; it is not necessary to use both. Bolts

with a diameter of 8 mm and 80 mm in length are suggested.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW712N T 3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info