Bedienungsanleitung DeWalt DW717XPS T 2 (Seite 31 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546165

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

-– sharpness of the saw blade;

-– correct adjustment of the saw blade.

Ensure that the local extraction as well as hoods, baffles and chutes are

properly adjusted.

• Please be aware of the following factors influencing exposure

to noise:

-– use saw blades designed to reduce the emitted noise;

-– use only well sharpened saw blades;

• Machine maintenance shall be conducted periodically;

• Machine faults, including guards or saw blade, shall be reported as

soon as they are discovered;

• Provide adequate general or localized lighting;

• Ensure the operator is adequately trained in the use, adjustment and

operation of the machine;

• When fitted with laser, DO NOT change to a different type of laser.

Repairs shall only be carried out by the laser manufacturer or an

authorized agent.

Residual Risks

The following risks are inherent to the use of saws:

– injuries caused by touching the rotating parts

In spite of the application of the relevant safety regulations and the

implementation of safety devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of accidents caused by the uncovered parts of the rotating saw

blade.

– Risk of injury when changing the blade.

– Risk of squeezing fingers when opening the guards.

– Health hazards caused by breathing dust developed when sawing

wood, especially oak, beech and MDF.

Package contents

The package contains:

1 Assembled mitre saw

1 Blade spanner

1 Saw blade

1 Dustbag

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may have

occurred during transport.

• Take the time to thoroughly read and understand this manual prior to

operation.

Description (ﬁ g. A1 - A7)

WARNING: Never modify the power tool or any part of it.

Damage or personal injury could result.

1 On/off switch

2 Moveable lower blade guard

3 Fence left-hand side

4 Mitre lever

5 Mitre latch

6 Dust spout (not shown)

7 Mitre scale

8 Fence right-hand side

9 Kerf plate

10 Carrying handle

11 Operating handle

12 Head lock up release lever

13 Electronic speed control dial

14 Spindle lock

15 Bevel scale

16 Rail lock knob

17 Grooving stop

18 Slide stop

19 Fixed upper blade guard

20 Bevel latch/lever

21 Bevel clamp handle

22 Head lock down pin

23 Wrench

24 Hand indentation

25 Bench mounting holes

26 Dustbag

Optional accessories

27 Work support extension

28 LED Worklight System

29 Work piece clamp

30 Laser

INTENDED USE

Your DW717 mitre saw has been designed for professional cutting of wood,

wood products, aluminium and plastics. It will perform the sawing operations

of cross-cutting, bevelling and mitring easily, accurately and safely.

The DW717 mitre saw is a professional power tool. DO NOT let children

come into contact with the tool. Supervision is required when inexperienced

operators use this tool.

Electrical safety

The electric motor has been designed for one voltage only. Always check

that the power supply corresponds to the voltage on the rating plate.

Your tool is double insulated in accordance with EN 61029;

therefore no earth wire is required.

In case of cord replacement the tool must only be repaired by an

authorized service agent or by qualiﬁ ed electrician.

Mains plug replacement

(U.K. & Ireland only)

• Should your mains plug need replacing and you are competent to

do this, proceed as instructed below. If you are in doubt, contact an

authorized D

EWALT repair agent or a qualiﬁ ed electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug with bared copper

conductors is dangerous if engaged in a live socket outlet.

• Only ﬁ t 13 Amperes BS1363A approved plugs ﬁ tted with the correctly

rated fuse (1).

• The cable wire colours, or a letter, will be marked at the connection

points of most good quality plugs. Attach the wires to their respective

points in the plug (see below). Brown is for Live (L) (2) and Blue is for

Neutral (N) (4).

• Before replacing the top cover of the mains plug ensure that the cable

restraint (3) is holding the outer sheath of the cable ﬁ rmly and that the

two leads are correctly ﬁ xed at the terminal screws.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW717XPS T 2 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info