Bedienungsanleitung DeWalt DW717XPS T 2 (Seite 37 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546165

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Dust extraction (ﬁ g. A2 & A3)

• Fit the dustbag (26) onto the dust spout (6).

• Whenever possible, connect a dust extraction device designed in

accordance with the relevant regulations regarding dust emission.

Saw blades

To obtain the stated cutting capacities, always use 305 mm saw blades

with 30 mm arbor holes.

Transporting (ﬁ g. A1, A2 & B)

In order to conveniently carry the mitre saw, a carrying handle (10) has

been included on the top of the saw arm.

• To transport the saw, lower the head and depress the lock down pin (22).

• Lock the rail lock knob with the saw head in the front position, lock the

mitre arm in the full left mitre angle, slide the fence (3 & 8) completely

inward and lock the bevel lever (20) with the saw head in the vertical

position to make the tool as compact as possible.

• Always use the carrying handle (10) or the hand indentations (24)

shown in ﬁ g. B to transport the saw.

MAINTENANCE

Your DEWALT power tool has been designed to operate over a long period

of time with a minimum of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of injury, turn unit off and

disconnect machine from power source before installing

and removing accessories, before adjusting or changing set-ups

or when making repairs. Be sure the trigger switch is in the OFF

position. An accidental start-up can cause injury.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of the main housing with dry

air as often as dirt is seen collecting in and around the air vents.

Wear approved eye protection and approved dust mask when

performing this procedure.

WARNING:Never use solvents or other harsh chemicals for

cleaning the non-metallic parts of the tool. These chemicals

may weaken the materials used in these parts. Use a cloth

dampened only with water and mild soap. Never let any liquid

get inside the tool; never immerse any part of the tool into a

liquid.

WARNING: To reduce the risk of injury, regularly clean the

table top.

WARNING: To reduce the risk of injury, regularly clean the

dust collection system.

Optional Accessories (ﬁ g. A3 - A6)

WARNING: Since accessories, other than those offered by

DEWALT, have not been tested with this product, use of such

accessories with this tool could be hazardous. To reduce the

risk of injury, only DEWALT, recommended accessories should

be used with this product.

LASER WARNING:

LASER RADIATION: DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

MAXIMUM OUTPUT POWER

<1MW @ 630 NM – 680 NM

IEC 60825-1 +A1, +A2:2002

LED WORKLIGHT WARNING:

LED RADIATION: DO NOT STARE INTO BEAM

CLASS 2 LED PRODUCT

MAXIMUM OUTPUT POWER

P = 9.2 mW;

peak

= 456 nm

IEC 60825-1:1:1993; +A1:1997; +A2:2001

Consult your dealer for further information on the appropriate accessories.

Protecting the Environment

Separate collection. This product must not be disposed of with

normal household waste.

Should you ﬁnd one day that your DEWALT product needs

replacement, or if it is of no further use to you, do not dispose of it with

household waste. Make this product available for separate collection.

Separate collection of used products and packaging allows

materials to be recycled and used again. Re-use of recycled

materials helps prevent environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate collection of electrical products

from the household, at municipal waste sites or by the retailer when you

purchase a new product.

DEWALT provides a facility for the collection and recycling of DEWALT

products once they have reached the end of their working life. To take

advantage of this service please return your product to any authorised repair

agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by

contacting your local DEWALT office at the address indicated in this manual.

Alternatively, a list of authorised DEWALT repair agents and full details

of our after-sales service and contacts are available on the Internet at:

www.2helpU.com.

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW717XPS T 2 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info