Bedienungsanleitung DeWalt DW718XPS T 4 (Seite 30 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546175

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

SAVE THIS MANUAL FOR FUTURE REFERENCE

General Safety Rules

1. Keep work area clear.

Cluttered areas and benches invite injuries.

2. Consider work area environment.

Do not expose the tool to rain. Do not use the tool in damp or wet

conditions. Keep the work area well lit (250 - 300 Lux). Do not use

the tool where there is a risk of causing fire or explosion, e.g., in the

presence of flammable liquids and gases.

3. Guard against electric shock.

Avoid body contact with earthed surfaces (e.g., pipes, radiators,

cookers and refrigerators). When using the tool under extreme

conditions (e.g., high humidity, when metal swarf is being produced,

etc.), electric safety can be improved by inserting an isolating

transformer or a (FI) earth-leakage circuit-breaker.

4. Keep other persons away.

Do not let persons, especially children, not involved in the work, touch

the tool or the extension cord and keep them away from the work area.

5. Store idle tools.

When not in use, tools must be stored in a dry place and locked up

securely, out of reach of children.

6. Do not force the tool.

It will do the job better and safer at the rate to which it was intended.

7. Use the right tool.

Do not force small tools to do the job of a heavy duty tool. Do not use

tools for purposes not intended; for example do not use circular saws

to cut tree limbs or logs.

8. Dress properly.

Do not wear loose clothing or jewellery, as these can be caught in

moving parts. Non-skid footwear is recommended when working

outdoors. Wear protective hair covering to contain long hair.

9. Use protective equipment.

Always use safety glasses. Use a face or dust mask if working

operations create dust or flying particles. If these particles might be

considerably hot, also wear a heat-resistant apron. Wear ear protection

at all times. Wear a safety helmet at all times.

10. Connect dust extraction equipment.

If devices are provided for the connection of dust extraction and

collecting equipment, ensure these are connected and properly used.

11. Do not abuse the cord.

Never yank the cord to disconnect it from the socket. Keep the

cord away from heat, oil and sharp edges. Never carry the tool by its

cord.

12. Secure work.

Where possible use clamps or a vice to hold the work. It is safer than

using your hand and it frees both hands to operate the tool.

13. Do not overreach.

Keep proper footing and balance at all times.

14. Maintain tools with care.

Keep cutting tools sharp and clean for better and safer performance.

Follow instructions for lubricating and changing accessories. Inspect

tools periodically and if damaged have them repaired by an authorized

service facility. Keep handles and switches dry, clean and free from oil

and grease.

15. Disconnect tools.

When not in use, before servicing and when changing accessories such

as blades, bits and cutters, disconnect tools from the power supply.

16. Remove adjusting keys and wrenches.

Form the habit of checking to see that adjusting keys and wrenches are

removed from the tool before operating the tool.

17. Avoid unintentional starting.

Do not carry the tool with a finger on the switch. Be sure that the tool is

in the “off” position before plugging in.

18. Use outdoor extension leads.

Before use, inspect the extension cable and replace if damaged.

When the tool is used outdoors, use only extension cords intended for

outdoor use and marked accordingly.

19. Stay alert.

Watch what you are doing. Use common sense. Do not operate the tool

when you are tired or under the influence of drugs or alcohol.

20. Check for damaged parts.

Before use, carefully check the tool and mains cable to determine

that it will operate properly and perform its intended function. Check

for alignment of moving parts, binding of moving parts, breakage of

parts, mounting and any other conditions that may affect its operation.

A guard or other part that is damaged should be properly repaired or

replaced by an authorized service centre unless otherwise indicated

in this instruction manual. Have defective switches replaced by an

authorized service centre. Do not use the tool if the switch does not

turn it on and off. Never attempt any repairs yourself.

WARNING! The use of any accessory or attachment or

performance of any operation with this tool other than those

recommended in this instruction manual may present a risk of

personal injury.

21. Have your tool repaired by a qualified person.

This electric tool complies relevant safety rules. Repairs should only be

carried out by qualified persons using original spare parts; otherwise this

may result in considerable danger to the user.

Additional Safety Rules for Mitre Saws

• The machine is provided with a special configured power supply cord

which can only be replaced by the manufacturer or its authorised

service agent.

• Do not use the saw to cut other materials than those recommended by

the manufacturer.

• Do not operate the machine without guards in position, or if guards do

not function or are not maintained properly.

• Ensure that the arm is securely fixed when performing bevel cuts.

• Keep the floor area around the machine level, well-maintained and free

of loose materials, e.g., chips and cut-offs.

• Use correctly sharpened saw blades. Observe the maximum speed

mark on the saw blade.

• Make sure all locking knobs and clamp handles are tight before starting

any operation.

• Never place either hand in the blade area when the saw is connected to

the electrical power source.

• Never attempt to stop a machine in motion rapidly by jamming a tool or

other means against the blade; serious accidents can occur.

• Before using any accessory consult the instruction manual.

The improper use of an accessory can cause damage.

• Use a holder or wear gloves when handling a saw blade.

• Ensure that the saw blade is mounted correctly before use.

• Make sure that the blade rotates in the correct direction.

• Do not use blades of larger or smaller diameter than recommended. For

the proper blade rating refer to the technical data. Use only the blades

specified in this manual, complying with EN 847-1.

• Consider applying specially designed noise-reduction blades.

• Do not use HSS blades.

• Do not use cracked or damaged saw blades.

• Do not use any abrasive or diamond discs.

• Never use your saw without the kerf plate.

• Raise the blade from the kerf in the workpiece prior to releasing the switch.

• Do not wedge anything against the fan to hold the motor shaft.

• The blade guard on your saw will automatically raise when the arm is

brought down; it will lower over the blade when head lock up release

lever (12) is pushed.

• Never raise the blade guard manually unless the saw is switched off.

The guard can be raised by hand when installing or removing saw

blades or for inspection of the saw.

ENGLISH

DeWalt DW718XPS T 4 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info