Bedienungsanleitung DeWalt DW721KN T 2 (Seite 37 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546511

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

ENGLISH

Adjusting the Roller Head Bearings Arm Tracks

(ﬁ g. 49–52)

If lateral movement is occurring in the roller head assembly, the bearings

need adjustment.

1. Pull the yoke assembly forward to the end of the arm tracks and

keep in position (fig. 49).

2. Loosen the locking screws (a5) (fig. 50, 51).

3. Using an hex key, slightly rotate the bearings (a6) until lateral

movement has been neutralised (fig. 52).

4. Retighten the locking screws (a5) ensuring that the head

automatically goes into the rest position.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

Before use, carefully check the upper blade guard, movable lower

blade guard as well as the dust extraction tube to determine that it will

operate properly. Ensure that chips, dust or workpiece particle cannot

lead to blockage of one of the functions.

In case of workpiece fragments jammed between saw blade and

guards disconnect the machine from the power supply and follow the

instructions given in section Mounting the Saw Blade. Remove the

jammed parts and reassembling the saw blade.

WARNING: Blow dirt and dust out of the main housing

with dry air as often as dirt is seen collecting in and around

the air vents. Wear approved eye protection and approved

dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals

for cleaning the non-metallic parts of the tool. These

chemicals may weaken the materials used in these parts.

Use a cloth dampened only with water and mild soap.

Never let any liquid get inside the tool; never immerse any

part of the tool into a liquid.

WARNING: To reduce the risk of injury, regularly clean

the table top.

WARNING: To reduce the risk of injury, regularly clean

the dust collection system.

Dust Extraction

WARNING: Always connect a dust extraction device

designed in accordance with relevant regulation regarding

dust emission. The air velocity of external connected system

shall be 20m/s +/–2m/s. Velocity to be measured in the

connection tube at the point of connection, with the tool

connected but not running.

Transporting

To transport the machine be sure the saw head is safely locked. Please

be aware the table is not suitable to lift the machine up. Always use

a fork-lift for transporting. For safe lifting set the fork under the lower

cross-bar of the leg-stand.

Optional Accessories

WARNING: Since accessories, other than those offered

by DEWALT, have not been tested with this product, use

of such accessories with this tool could be hazardous.

To reduce the risk of injury, only DEWALT, recommended

accessories should be used with this product.

Consult your dealer for further information on the appropriate

accessories.

Recommended saw blade DW721 / DW722 - DT4303

Protecting the Environment

Separate collection. This product must not be disposed of

with normal household waste.

Should you ﬁnd one day that your DEWALT product needs replacement,

or if it is of no further use to you, do not dispose of it with household

waste. Make this product available for separate collection.

Separate collection of used products and packaging allows

materials to be recycled and used again. Re-use of

recycled materials helps prevent environmental pollution

and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical

products from the household, at municipal waste sites or by the retailer

when you purchase a new product.

DEWALT provides a facility for the collection and recycling of DEWALT

products once they have reached the end of their working life. To take

advantage of this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by

contacting your local DEWALT office at the address indicated in this

manual. Alternatively, a list of authorised DEWALT repair agents and

full details of our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

GUARANTEE

DEWALT is confident of the quality of its products and offers

an outstanding guarantee for professional users of the

product. This guarantee statement is in addition to and in no

way prejudices your contractual rights as a professional user

or your statutory rights as a private non-professional user. The

guarantee is valid within the territories of the Member States of

the European Union and the European Free Trade Area.

• 30 DAY NO RISK SATISFACTION GUARANTEE •

If you are not completely satisfied with the performance of your

EWALT tool, simply return it within 30 days, complete with all

original components, as purchased, to the point of purchase,

for a full refund or exchange. The product must have been

subject to fair wear and tear and proof of purchase must be

produced.

• ONE YEAR FREE SERVICE CONTRACT •

If you need maintenance or service for your D

EWALT tool, in

the 12 months following purchase, you are entitled to one

service free of charge. It will be undertaken free of charge at

an authorised D

EWALT repair agent. Proof of purchase must

be produced. Includes labour. Excludes accessories and spare

parts unless failed under warranty.

• ONE YEAR FULL WARRANTY •

If your D

EWALT product becomes defective due to faulty

materials or workmanship within 12 months from the date of

purchase, D

EWALT guarantees to replace all defective parts

free of charge or – at our discretion – replace the unit free of

charge provided that:

• The product has not been misused;

• The product has been subject to fair wear and tear;

• Repairs have not been attempted by unauthorised

persons;

• Proof of purchase is produced.

• The product is returned complete with all original

components

If you wish to make a claim, contact your seller or check the

location of your nearest authorised DEWALT repair agent in

the DEWALT catalogue or contact your DEWALT office at the

address indicated in this manual. A list of authorised D

EWALT

repair agents and full details of our after-sales service is

available on the Internet at: www.2helpU.com

DeWalt DW721KN T 2 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info