Bedienungsanleitung DeWalt DW738 (Seite 22 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546442

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

en - 5 15

ENGLISH

Basic saw cuts

Always position the blade guard approximately 10 mm above the surface

of the workpiece.

Ripping (fig. L)

• Install the rip fence as described above.

• Set the rip fence for the width of cut required by using the scale.

• Slowly feed the workpiece into the blade, keeping it firmly pressed onto

the table and against the fence. Allow the teeth to cut and do not force

the workpiece through the blade. The blade speed should be kept

constant.

Always use a push stick.

Always switch OFF the tool when work is finished and before

unplugging.

Bevel cuts (fig. M)

• Set the table to the required angle.

• Install the fence to the right of the blade.

• Proceed as for ripping.

Freehand cuts

Freehand cuts are performed without the help of a fence.

• Do not attempt to cut curves smaller than the blade will allow.

• Whenever possible, connect a dust extraction device designed in

accordance with the relevant regulations regarding dust emission.

Consult your dealer for further information on the appropriate accessories.

Maintenance

Your DEWALT Power Tool has been designed to operate over a long

period of time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Lubrication

Your Power Tool requires no additional lubrication.

Cleaning

Keep the ventilation slots clear and regularly clean the housing with a soft

cloth.

Unwanted tools and the environment

Take your tool to an authorized DEWALT repair agent where it will be

disposed of in an environmentally safe way.

GUARANTEE

• 30 DAY NO RISK SATISFACTION GUARANTEE •

If you are not completely satisfied with the performance of your

DEWALT machine, simply return it within 30 days, complete as

purchased, to the point of purchase, for a full refund or exchange.

Proof of purchase must be produced.

• ONE YEAR FREE SERVICE CONTRACT •

If you need maintenance or service for your DEWALT machine, in the

12 months following purchase, it will be undertaken free of charge at

an authorized DEWALT repair agent. Proof of purchase must be

produced. Includes labour and spare parts for Power Tools. Excludes

accessories.

• ONE YEAR WARRANTY •

If your DEWALT product becomes defective due to faulty materials or

workmanship within 12 months from the date of purchase, we

guarantee to replace all defective parts free of charge or, at our

discretion, replace the unit free of charge provided that:

• The product has not been misused.

• Repairs have not been attempted by unauthorized persons.

• Proof of purchase date is produced.

This guarantee is offered as an extra benefit and is additional to

consumers statutory rights.

For the location of your nearest authorized DEWALT repair agent,

please use the appropriate telephone number on the back of this

manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW738 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info